Yes. The KASK Zenith X2 MAX FR (WHE00140) is a non-vented safety helmet sized for larger heads — 60 to 66 cm — built for oil & gas, utilities, welding, foundries, and high-heat industrial work. It meets ANSI Z89.1 Type I and Type II, Class E, HT-LT, and KASK states it is proof tested at 20,000 volts. For flame and heat exposure, KASK tests the HD polypropylene shell, the EPS D-Core/HD Crown foam, the chinstrap, and the lamp clips to ASTM F2621 at an incident energy of 19 cal/cm², and the aramid inner padding has an ATPV of 4.8 cal/cm² (ASTM F1959).

The KASK Zenith X2 MAX FR meets ANSI Z89.1 Type I and Type II, Class E, HT-LT. Type II means all-around protection against impact and penetration, including front, rear, and sides; Class E is the electrical class (KASK proof tests it at 20,000 volts); and HT-LT marks the standard's optional high- and low-temperature performance. KASK also tests it to selected clauses of EN 12492 (front, lateral, and rear impact energy absorption, penetration, and retention system strength and effectiveness) and to ASTM F2621 at an incident energy of 19 cal/cm². The aramid padding meets ASTM F1959 with an ATPV of 4.8 cal/cm², and the foam's fire characteristics conform to EN 13501-1 Class E.

The KASK Zenith X2 MAX FR fits head sizes from 60 to 66 cm — the MAX version is sized for larger head dimensions. Fit is set with KASK's Adaptive Fit System: a double-diameter dial for easier size adjustment, ergonomic side wings that hold the helmet securely against the back of the head, and KASK's patented Self Adaptive Live Hinge, which self-adjusts as the wearer moves. A lateral adjustment divider on the chinstrap fine-tunes positioning.

Yes. The KASK Zenith X2 MAX FR is a non-vented ANSI Z89.1 Class E helmet — the electrical class for head protection — and KASK states it is proof tested at 20,000 volts. That electric shock protection is combined with fire-resistant components, so it suits electrical and utility work where flames, sparks, or heat may also be present.

Its main components are fire-retardant or self-extinguishing. KASK tests the HD polypropylene external shell, the self-extinguishing high-density EPS D-Core and HD Crown, the replaceable self-extinguishing polyamide lamp clips, and the acrylic chinstrap (low flammability, non-melting, self-extinguishing) to ASTM F2621 at an incident energy of 19 cal/cm². The aramid inner padding is tested to ASTM F1959/F1959M-22 with an ATPV of 4.8 cal/cm², resists catching fire, and does not melt or drip under direct extreme heat. The foam's fire characteristics conform to EN 13501-1 Class E.

They are the helmet's inner impact-protection system. The internal shell is made of self-extinguishing Neopor® Ccycled® by BASF, an EPS foam obtained from the chemical recycling of plastic waste. KASK's D-Core and HD Crown technology uses this high-density expanded polystyrene to protect against all-around impacts, working with the HD polypropylene outer shell, which offers greater impact energy absorption and a hardened surface that resists wear and tear.

The KASK Zenith X2 MAX FR weighs 1.19 lb, according to KASK. Comfort comes from the Adaptive Fit System with its double-diameter dial and self-adjusting hinge, a soft PA nylon headband, and high-comfort aramid inner padding that snaps in and out with the Click-In system. ISP lists a temperature of use from -22°F to +140°F.

The KASK Zenith X2 MAX FR has standard 30 mm EURO slots for KASK earmuffs, Easy Click integrated slots for visors and face shields (adapters required), a frontal accessory slot for badge holders and headlamps (with a cap cover for debris protection), replaceable FR lamp clips with earplug hooks, a high-visibility nameplate on the back for identification, and a ring-to-hook chinstrap loop to attach the helmet to a harness or other items.

For hazardous, high-heat work — and for larger heads — yes. A traditional hard hat is typically ANSI Z89.1 Type I, covering top impacts only. The KASK Zenith X2 MAX FR is certified Type I and Type II, with all-around impact and penetration protection including front, rear, and sides, plus Class E electrical protection proof tested at 20,000 volts. It adds FR components tested to ASTM F2621 at 19 cal/cm², aramid padding with ATPV 4.8 cal/cm², an FR chinstrap, and a 60–66 cm fit range engineered for larger heads.

It comes in White (WHE00140-201) and Yellow (WHE00140-202). Industrial Safety Products (industrialsafetyproducts.com) sells the KASK Zenith X2 MAX FR (WHE00140) with free shipping and optional custom logo imprinting. Logo printing is priced per location: $6.60 for a one-color front logo, or $10.90 per location for up to 4 colors, on up to four locations (front, back, right, and left sides). It requires a minimum of 20 helmets, and a set-up fee may apply; orders under the minimum ship as non-logo items.