Yes. The KASK Zenith X2 MAX FR Hi-Viz (WHE00141) is a non-vented safety helmet sized for larger heads — 60 to 66 cm — built for utilities, oil & gas, welding, and industrial maintenance, where fire, impact, and electrical hazards intersect. It meets ANSI Z89.1 Type I and Type II, Class E, HT-LT, and KASK states it is proof tested at 20,000 volts. For flame exposure, KASK tests the HD polypropylene shell, the EPS D-Core/HD Crown foam, and the lamp clips to ASTM F2621 at an incident energy of 19 cal/cm², and the aramid inner padding has an ATPV of 4.8 cal/cm² (ASTM F1959). A high-visibility shell, luminescent lamp clips, and reflective decals add visibility in low light.

The KASK Zenith X2 MAX FR Hi-Viz meets ANSI Z89.1 Type I and Type II, Class E, HT-LT. Type II means all-around protection against impact and penetration, including front, rear, and sides; Class E is the electrical class (KASK proof tests it at 20,000 volts); and HT-LT marks the standard's optional high- and low-temperature performance. KASK also tests it to selected clauses of EN 12492 (front, lateral, and rear impact energy absorption, penetration, and retention system strength and effectiveness) and to ASTM F2621 at an incident energy of 19 cal/cm². The aramid padding meets ASTM F1959 with an ATPV of 4.8 cal/cm², and the foam's fire characteristics conform to EN 13501-1 Class E.

The KASK Zenith X2 MAX FR Hi-Viz fits head sizes from 60 to 66 cm — the MAX version is made for larger heads without giving up the FR, impact, and electrical protection. Fit is set with KASK's Adaptive Fit System: a double-diameter dial for easier size adjustment, ergonomic side wings that hold the helmet securely against the back of the head, and KASK's patented Self Adaptive Live Hinge, which self-adjusts as the wearer moves. A lateral adjustment divider on the chinstrap fine-tunes positioning.

Yes. The KASK Zenith X2 MAX FR Hi-Viz is a non-vented ANSI Z89.1 Class E helmet — the electrical class for head protection — and KASK states it is proof tested at 20,000 volts. That electric shock protection is combined with fire-resistant components, so it suits electrical and utility work where flames or heat may also be present.

Its main components are fire-retardant or self-extinguishing. KASK tests the HD polypropylene external shell, the self-extinguishing high-density EPS D-Core and HD Crown, and the self-extinguishing polyamide luminescent lamp clips to ASTM F2621 at an incident energy of 19 cal/cm². The aramid inner padding is tested to ASTM F1959/F1959M-22 with an ATPV of 4.8 cal/cm², resists catching fire, and does not melt or drip under direct extreme heat. The foam's fire characteristics conform to EN 13501-1 Class E.

They are the helmet's inner impact-protection system. The internal shell is made of Neopor® Ccycled® by BASF, an EPS foam obtained from the chemical recycling of plastic waste, which KASK makes self-extinguishing. KASK's D-Core and HD Crown technology uses this high-density expanded polystyrene to protect against all-around impacts, working with the HD polypropylene outer shell, which excels in high impact absorption and penetration protection.

The KASK Zenith X2 MAX FR Hi-Viz weighs 1.19 lb, according to KASK. Comfort comes from the Adaptive Fit System with its double-diameter dial and self-adjusting hinge, a soft PA nylon headband, high-comfort aramid inner padding that snaps in and out with the Click-In system, and a Dry+ moisture-wicking liner. ISP lists a temperature of use from -22°F to +140°F.

Two colors: White (WHE00141-201) and Yellow Fluo (WHE00141-221). Both include a high-visibility color shell, luminescent lamp clips, and high-visibility reflective decals for low-light conditions, plus a hi-viz nameplate on the back of the helmet for easy identification.

The KASK Zenith X2 MAX FR Hi-Viz has standard 30 mm EURO slots for KASK earmuffs, Easy Click visor adapters for visors and face shields, a frontal accessory slot for badge holders and headlamps (with a cap cover for debris protection), four replaceable FR luminescent lamp clips with earplug hooks, and a ring-to-hook chinstrap loop to attach the helmet to a harness or other items.

For hazardous, high-heat work — and for larger heads — yes. A traditional hard hat is typically ANSI Z89.1 Type I, covering top impacts only. The KASK Zenith X2 MAX FR Hi-Viz is certified Type I and Type II, with all-around impact and penetration protection including front, rear, and sides, plus Class E electrical protection proof tested at 20,000 volts. It adds FR components tested to ASTM F2621 at 19 cal/cm², aramid padding with ATPV 4.8 cal/cm², an adjustable chinstrap, hi-viz details, and a 60–66 cm fit range engineered for larger heads.

Industrial Safety Products (industrialsafetyproducts.com) sells the KASK Zenith X2 MAX FR Hi-Viz (WHE00141) with free shipping and optional custom logo imprinting. Logo printing is priced per location: $6.60 for a one-color front logo, or $10.90 per location for up to 4 colors, on up to four locations (front, back, right, and left sides). It requires a minimum of 20 helmets, and a set-up fee may apply; orders under the minimum ship as non-logo items.