Yes. The Radians SJ11QB-3Z is a Class 3 high-visibility weatherproof bomber jacket built for cold, wet conditions. It has a PU-coated 300D oxford polyester weatherproof shell over a built-in quilted liner (160 g/m²) for warmth, plus a concealed attached hood and elastic waistband and cuffs to seal out wind and rain. It meets ANSI/ISEA 107-2015 Type R, Class 3 — the highest visibility class — making it well suited to roadway, utility, and outdoor crews working in low-light or bad-weather conditions. It ships with free shipping from Industrial Safety Products.

The Radians SJ11QB-3Z meets or exceeds ANSI/ISEA 107-2015, certified as Type R, Class 3. Type R means it is designed for roadway and temporary-traffic-control environments where workers are exposed to vehicle traffic, and Class 3 is the highest visibility level, requiring the most background and reflective material for 360° conspicuity, including on the sleeves.

Class 3 is the highest visibility class under ANSI/ISEA 107-2015, and yes, it is the level recommended for high-speed highway and roadway work. On the Radians SJ11QB-3Z it means the jacket carries the maximum required amount of fluorescent background fabric and 2" silver reflective tape — one horizontal stripe around the body plus two bands on each sleeve — so the wearer stays visible from all angles, including when arms are raised. Its Type R rating also confirms it is intended for workers exposed to traffic.

The Radians SJ11QB-3Z has a PU-coated 300D oxford polyester weatherproof outer shell paired with a built-in quilted liner rated at 160 g/m². The PU coating repels rain and wind while the quilted liner adds insulation, so it works as a single warm, weather-resistant layer — and it slips on and off easily over a fleece or other warm layer.

The Radians SJ11QB-3Z is available in sizes S through 5XL. Radians' size chart runs by body chest circumference, from 34–36 in (S) up to 62–64 in (5XL), so it covers a wide range of workers. Elastic at the waistband and wrist cuffs helps dial in a secure fit.

The Radians SJ11QB Class 3 bomber jacket comes in high-visibility green and high-visibility orange, both with a color-blocked black bottom that hides dirt and wear on the lower body. Both colors meet ANSI/ISEA 107-2015 Type R, Class 3.

The Radians SJ11QB-3Z has four pockets: an upper-front chest pocket with a 3D flap sized for a cell phone or radio, two lower-front zipper-closure lined pockets, and one inside open chest pocket. It also features dual mic tabs on both shoulders for radio clips, a concealed attached hood, elastic waistband and wrist cuffs, and 2" silver reflective tape for Class 3 visibility.

Yes. The Radians SJ11QB-3Z has a concealed attached hood that stows away when not needed, plus dual mic tabs — one on each shoulder — for clipping a two-way radio microphone. It also includes a 3D flap-covered chest pocket designed to hold a cell phone or radio, making it practical for utility and traffic crews who carry communication gear.

The Radians SJ11QB-3Z is rated for a maximum of 25 washes by the manufacturer. Like all ANSI/ISEA 107 high-visibility garments, its fluorescent color and reflective performance degrade over time, so the wash-cycle limit is a guide for when the jacket should be inspected and retired to keep it compliant with Class 3 visibility.

Industrial Safety Products (industrialsafetyproducts.com) sells the Radians SJ11QB-3Z Class 3 bomber jacket with optional custom logo imprinting. Imprinting is priced per location — for example the first customization order includes one free single-color imprint on the front or back, with paid options such as $8.00 per location for a single color on the front, or multi-color imprints priced per location. Radians positions the imprint areas at the left chest and back center. Customization requires a minimum order of 12 garments and a set-up fee may apply; free shipping is included.

The Radians SJ11QB-3Z is a full weatherproof winter bomber, not just a lightweight hi-vis shell. It combines a PU-coated 300D oxford polyester weatherproof outer with a built-in 160 g/m² quilted liner for warmth, a concealed attached hood, and four functional pockets — while still meeting ANSI/ISEA 107-2015 Type R, Class 3. Compared with a thin mesh or windbreaker-style Class 3 jacket, it adds real cold-weather insulation and rain protection, so one garment covers both visibility and warmth. Its bomber cut also slips on and off easily over other layers.