Yes. The Radians SJ110B-3Z is a Class 3 high-visibility 2-in-1 winter bomber jacket built for cold, wet conditions. Its PU-coated weather-resistant polyester shell repels wind and rain, while a zip-out removable fleece liner adds insulation you can add or remove as the weather changes. A concealed attached hood plus knit waistband and cuffs help seal out the cold. It meets ANSI/ISEA 107-2015 Type R, Class 3 — the highest visibility class — so it suits roadway, utility, and outdoor crews working in low-light or bad-weather conditions near traffic.

The Radians SJ110B-3Z meets or exceeds ANSI/ISEA 107-2015, certified as Type R, Class 3 — and yes, Class 3 is the highest visibility level and the one recommended for high-speed highway and roadway work. Type R means the garment is designed for workers exposed to roadway vehicle traffic and temporary traffic control. Class 3 requires the most fluorescent background fabric and reflective material for 360° conspicuity, including on the sleeves, so the wearer stays visible from all angles even with arms raised.

"Two-in-One" means the Radians SJ110B-3Z is really two garments in one. It has a zip-out removable fleece liner whose sleeves are lined for easy on/off, so you can wear the weather-resistant outer shell alone in milder weather, wear the fleece liner on its own as a standalone jacket, or zip them together for full cold-weather protection. This lets one purchase cover a range of temperatures instead of needing separate jackets.

The Radians SJ110B-3Z has a PU-coated weather-resistant polyester outer shell. The polyurethane (PU) coating repels rain and blocks wind, making it a weatherproof shell for wet, cold outdoor work. Paired with the zip-out fleece liner, it works as a warm, weather-resistant system. It is designed to resist weather rather than as fully submersible waterproofing, and it is rated by the manufacturer for a maximum of 25 wash cycles.

The Radians SJ110B-3Z is available at Industrial Safety Products in sizes M through 5XL. Radians' size chart runs by body chest circumference, from 38–40 in (M) up to 62–64 in (5XL), so it covers a wide range of workers. Knit elastic at the waistband and wrist cuffs helps dial in a secure, draft-blocking fit.

The Radians SJ110B Class 3 bomber jacket comes in high-visibility green and high-visibility orange, both with a color-blocked black bottom that hides dirt and wear on the lower body. Both colors meet ANSI/ISEA 107-2015 Type R, Class 3.

The Radians SJ110B-3Z has 7 pockets: an upper-front gusseted chest pocket for a cell phone or radio, two lower-front zippered fleece-lined slash pockets, two inside fleece pockets, and two left-sleeve pencil pockets. It also features dual mic tabs — one on each shoulder — for clipping a two-way radio microphone, a concealed attached hood, knit waistband and wrist cuffs, and 2" silver reflective tape placed both horizontally and vertically for Class 3 visibility.

The Radians SJ110B-3Z is rated for a maximum of 25 washes by the manufacturer. Like all ANSI/ISEA 107 high-visibility garments, its fluorescent color and reflective tape performance degrade over time, so the wash-cycle limit is a guide for when the jacket should be inspected and retired to keep it compliant with Class 3 visibility.

Industrial Safety Products (industrialsafetyproducts.com) sells the Radians SJ110B-3Z Class 3 bomber jacket with optional custom logo imprinting. Imprinting is offered per location, with Radians positioning the imprint areas at the left chest and back center; the first customization order includes one free single-color imprint on the front. Customization requires a minimum order of 12 garments and a set-up fee may apply. Orders that do not meet the minimum ship as plain (non-logo) items.

The Radians SJ110B-3Z is a 2-in-1 weatherproof winter bomber, not just a lightweight hi-vis shell. It pairs a PU-coated weather-resistant polyester outer with a zip-out removable fleece liner, so one garment adapts from mild to cold weather — wear the shell alone, the fleece alone, or both together. Add a concealed attached hood, knit waistband and cuffs, dual mic tabs, and 7 pockets, all while meeting ANSI/ISEA 107-2015 Type R, Class 3. Compared with a thin mesh or windbreaker-style Class 3 jacket, it delivers real cold-weather versatility and rain protection in a single purchase.