Yes. The Miller MFS-OGC1-02/50FT Falcon+ is a rugged overhead self-retracting lifeline (SRL) built for demanding construction, utility, mining, and confined-space work. It carries an ANSI/ASSE Z359.14-2021 Class 1 rating and meets OSHA 1926.502 and CSA Z259.2.2:2017. Its long 50 ft galvanized steel cable resists abrasion and corrosion, an impact-resistant nylon housing shrugs off jobsite abuse, and stainless steel and aluminum internal components extend service life. As a Class 1 device it is intended for anchorage overhead (at or above the dorsal D-ring), not for foot-level or leading-edge use.

The Miller Falcon+ MFS-OGC1-02/50FT meets or exceeds ANSI/ASSE Z359.14-2021 Class 1, complies with OSHA 1926.502, and is certified to CSA Z259.2.2:2017 for the Canadian market. The Class 1 designation identifies a self-retracting device intended for overhead anchorage (at or above the user's back D-ring), as opposed to Class 2 units that are approved for foot-level anchorage and leading-edge use. Under its OSHA rating it supports up to 420 lb (190.5 kg).

ANSI/ASSE Z359.14-2021 Class 1 means the Miller Falcon+ MFS-OGC1-02/50FT is designed to be anchored overhead — at or above the wearer's dorsal (back) D-ring — where free fall is limited. Class 1 SRLs are the standard choice when a suitable overhead anchor point is available. This is different from Class 2 devices (like the Falcon+ Edge), which are built and tested for foot-level anchorage and for a lifeline running over a sharp edge. If your anchor points are overhead, the Class 1 Falcon+ MFS-OGC1-02/50FT is the right type of device.

The Miller Falcon+ MFS-OGC1-02/50FT supports up to 420 lb (190.5 kg) under its OSHA capacity rating — the combined weight of the worker plus tools and equipment. That elevated capacity lets a wide range of workers use a single device, while it still meets ANSI Z359.14-2021 Class 1 and CSA Z259.2.2:2017.

The Miller Falcon+ uses a unique side payout design, meaning the galvanized steel cable feeds out from the side of the housing rather than straight off the drum. This reduces wear on the entry guide bushing and on the cable itself, lowers drag, and gives smoother, lighter operation — a real benefit on the longer 50 ft model. Combined with dual swivels and engineered spring tension, it reduces user fatigue and helps extend the working life of the unit.

The Miller MFS-OGC1-02/50FT uses a 50 ft galvanized steel cable lifeline and includes dual swivels plus two steel connectors: a steel carabiner as the harness/unit connector and a steel swivel snap hook as the anchor connector at the lifeline end. The dual swivels reduce cable twist for easier positioning. The galvanized cable and corrosion-resistant stainless steel and aluminum internals are built for wet and harsh environments.

No. The Miller Falcon+ MFS-OGC1-02/50FT is designed so that factory recertification is not required, which lowers long-term maintenance costs and keeps the device on the job instead of being shipped away periodically. Users still perform routine pre-use inspections and follow the manufacturer's inspection schedule, but there is no mandatory return-to-factory recertification interval.

No. The Miller Falcon+ MFS-OGC1-02/50FT is an ANSI Z359.14-2021 Class 1 device, meaning it must be anchored overhead (at or above the dorsal D-ring) and is not rated for foot-level anchorage or for a lifeline running over a sharp leading edge. For those applications you need a Class 2, leading-edge–rated unit such as the Miller Falcon+ Edge (MFS-LEP1-02), which is tested for sharp edges and foot-level tie-off. Choose the MFS-OGC1-02/50FT when a proper overhead anchor point is available.

Both are Miller Falcon+ SRLs with a galvanized steel cable, dual swivels, and a 420 lb capacity, but they are rated for different applications. The MFS-OGC1-02/50FT is a Class 1 device for standard overhead anchorage. The Falcon+ Edge MFS-LEP1-02 is a Class 2, leading-edge–rated device that adds an integral shock-absorber pack and is approved for foot-level anchorage and for a lifeline running over sharp edges. Pick the MFS-OGC1-02/50FT for conventional overhead work with a long working reach; pick the Edge model when you must tie off at or below your feet or the cable may cross an edge.

The Miller Falcon+ MFS-OGC1-02/50FT has a 50 ft galvanized steel cable, the longest option in this Falcon+ galvanized line, giving you the greatest vertical working range from a single overhead anchor. The same MFS-OGC1-02 model is also offered in 20 ft and 30 ft versions, so you can match the lifeline length to your work height while keeping identical ANSI Z359.14-2021 Class 1 protection, a 420 lb capacity, and the steel swivel snap hook.

Yes. The Miller Falcon+ MFS-OGC1-02/50FT is listed as TAA (Trade Agreements Act) compliant, which matters for government and federally funded procurement. Its country of origin is Mexico, and it ships boxed, one per case, in a Silver finish. It is the current replacement for the discontinued MP50G-Z7/50FT and MP65G-Z7/65FT, and it is part of Miller's redesigned PLUS family that aligns visually with current Honeywell Miller harnesses.

The Miller Falcon+ MFS-OGC1-02/50FT (50 ft, galvanized steel cable, steel swivel snap hook) is available from Industrial Safety Products (industrialsafetyproducts.com) with free shipping. It carries the up-to-date ANSI Z359.14-2021 Class 1 rating with a 420 lb capacity, making it the modern equivalent for anyone who previously used the discontinued MP50G-Z7/50FT or MP65G-Z7/65FT.