Yes. The KASK Zenith X2 FR Full Brim (WHE00150) is built for hot work, sparks, thermal hazards, and electrical risk in a single helmet. It meets ANSI Z89.1 Type I and Type II, Class E, HT-LT, and KASK states it is proof tested at 20,000 volts. For flame exposure, KASK tests the HD polypropylene shell, the D-Core/HD Crown foam, the acrylic chinstrap, and the lamp clips to ASTM F2621, and the aramid inner padding is rated ATPV 4.8 cal/cm² (ASTM F1959). Its full brim uses KASK Adaptive Brim™ technology, a flexible material instead of a rigid brim.

The KASK Zenith X2 FR Full Brim meets ANSI Z89.1 Type I and Type II, Class E, HT-LT. Type II means all-around protection against impact and penetration, including front, rear, and sides. Class E means electrical protection (KASK proof tests it at 20,000 volts), and HT-LT marks the standard's optional high- and low-temperature performance. KASK also tests it to selected clauses of EN 12492 (front, lateral, and rear impact energy absorption, plus retention system strength and effectiveness) and to ASTM F2621 for flame exposure. The aramid inner padding meets ASTM F1959 with an ATPV of 4.8 cal/cm², and the foam's fire characteristics conform to EN 13501-1 Class E.

Yes. The KASK Zenith X2 FR Full Brim is ANSI Z89.1 Class E, the electrical class for hard hats, and KASK states it is proof tested at 20,000 volts. It pairs this electric shock protection with a fire-resistant design, for jobs where electrical and flame hazards overlap.

Its main components are fire-resistant or self-extinguishing. KASK tests the HD polypropylene external shell, the self-extinguishing high-density EPS D-Core and HD Crown (Neopor® Ccycled® by BASF), the acrylic webbing chinstrap, and the self-extinguishing polyamide lamp clips to ASTM F2621 incident-energy exposure. The inner padding is aramid, tested to ASTM F1959/F1959M-22 with an ATPV of 4.8 cal/cm², and it does not melt or drip when exposed directly to extreme heat. The chinstrap is low-flammability, non-melting, and self-extinguishing, and the foam's fire characteristics conform to EN 13501-1 Class E.

Adaptive Brim™ is KASK's proprietary method of seamlessly integrating a flexible, durable material into the helmet's full brim instead of a rigid one. It addresses hazards that come with rigid brims: KASK says it reduces the likelihood of neck strain in a fall and helps keep the helmet stable in dynamic environments. The brim material resists heat, cold, and UV exposure, and it stays fully compatible with hearing protection.

It adjusts from 52 to 63 cm. The KASK Adaptive Fit System uses a double diameter dial for easier size adjustments, ergonomic side wings that fit against the back of the head, and KASK's patented Self Adaptive Live Hinge, which moves as you move. A lateral adjustment divider on the chinstrap lets you fine-tune strap positioning, and the chinstrap closes with a KASK buckle.

Yes. KASK lists the Zenith X2 FR Full Brim at 1.19 lb, and the Adaptive Fit System (double diameter dial and Self Adaptive Live Hinge) is designed for all-day comfort. It has a soft PA nylon headband, a Dry+ liner, and aramid comfort padding that is also fire resistant. The Adaptive Brim™ uses a flexible, durable material instead of a rigid brim.

It works with earmuffs, visors, headlamps, and neck protectors. The helmet has standard 30 mm EURO slots for KASK earmuffs, Easy Click visor adapters for visors and face shields, replaceable fire-retardant lamp clips, earplug hooks, and neck protector slots. A frontal accessory slot (with a cap cover for debris protection) accepts badge holders and headlamps, and a ring-to-hook chinstrap loop lets you secure the helmet to a harness or other gear.

For flame-exposed and electrical work, yes. Under ANSI Z89.1, a Type I hard hat is rated for top impact only. The KASK Zenith X2 FR Full Brim meets ANSI Z89.1 Type II for all-around impact and penetration protection, is Class E proof tested at 20,000 volts, and its shell, foam, chinstrap, and lamp clips are tested to ASTM F2621. It adds a chinstrap retention system and a flexible Adaptive Brim™ instead of a rigid brim. It is a clear step up if your site combines fire, sparks, and electrical risks.

Industrial Safety Products (industrialsafetyproducts.com) sells the KASK Zenith X2 FR Full Brim (WHE00150) with free shipping and optional custom logo printing. Logo printing is priced per location: $6.60 for a 1-color logo or $10.90 for up to 4 colors, with front and back locations available. It requires a minimum of 20 helmets, and a set-up fee may apply. It comes in White (WHE00150-760) and Yellow (WHE00150-761).