Yes. The KASK WHE00097 Zenith X2 is certified to EN 12492 — the European standard for mountaineering and work-at-height helmets — meaning it has a retention chinstrap engineered to keep the helmet on during a fall or slip, plus multi-directional impact protection. It's also ANSI Z89.1 Type I and Type II (top and lateral impact) and Class E for electrical hazards. A rear harness-attachment design, front accessory point, and four lamp clips make it well suited for tower, utility, rope-access, and construction-at-height work. It ships with free shipping from Industrial Safety Products.

The KASK WHE00097 Zenith X2 meets or exceeds ANSI Z89.1 Type I and Type II, Class E, and the European EN 12492 standard. Type I and II certify protection against both top and lateral impacts, Class E certifies dielectric (electrical) protection tested to 20,000 volts, and EN 12492 adds mountaineering/work-at-height requirements including chinstrap retention. This dual ANSI + EN certification makes it valid for both U.S. industrial and climbing/height-work use.

Yes. The KASK Zenith X2 (WHE00097) is Class E under ANSI Z89.1, meaning it provides dielectric protection tested to 20,000 volts — the highest electrical rating in the standard. Combined with its Type I and Type II impact rating, it protects against top and lateral impacts as well as electrical hazards, making it suitable for electricians, utility, and line workers. It ships free from Industrial Safety Products.

EN 12492 is the European standard for mountaineering and climbing helmets, and the KASK Zenith X2 (WHE00097) meets it. It sets strict requirements for impact absorption from the top and sides and — critically — for chinstrap strength and retention, so the helmet stays securely in place during a fall, slip, or work at height. Because the Zenith X2 is also ANSI Z89.1 Type I & II, Class E, it satisfies both U.S. industrial and European height-work standards in a single helmet.

Well. The KASK Zenith X2 (WHE00097) is engineered to excel in impact absorption even at low temperatures, down to -30 °C. Its high-density expanded-polystyrene internal shell and HD polypropylene outer shell maintain protective performance in cold conditions, making it a strong choice for outdoor and winter job sites.

The KASK Zenith X2 (WHE00097) has an external shell of HD (high-density) polypropylene, an internal shell of HD expanded polystyrene (EPS) for impact absorption, and a soft PA nylon headband. Its comfort padding uses Hydrocool® moisture-wicking fabric to help keep the wearer cool and dry, and the size-adjustment system integrates three components for all-day comfort.

Yes. The KASK Zenith X2 (WHE00097) is one-size-fits-most, with a size-adjustment system that integrates three components for a secure, all-day fit. It uses an eco-leather chinstrap with rear adjustment points and an updated lateral adjustment divider for a personalized fit, and the padding is lined with Hydrocool® moisture-wicking fabric for comfort.

Yes. The KASK Zenith X2 (WHE00097) comes with four removable nylon external lamp clips for securing a headlamp, plus a front attachment point for accessories such as badge holders. It's also designed to attach securely to a harness or other gear, supporting work-at-height and hands-free lighting setups.

Yes. The KASK WHE00097 Zenith X2 ships with free shipping from Industrial Safety Products. It's available in nine colors — White, Yellow, Orange, Red, Green, Blue, Black, Light Grey, and Anthracite — and optional custom logo imprinting is available on orders of 20 or more, priced per location.

Industrial Safety Products (industrialsafetyproducts.com) sells the KASK Zenith X2 (WHE00097) with optional custom logo imprinting. Logo printing is priced per location: $6.60 per location for a single color, or $10.90 per location for up to 4 colors, on up to four locations (front, back, right, and left sides). It requires a minimum order of 20 helmets, and a set-up fee may apply. Orders under the 20-unit minimum ship as non-logo items.

The KASK Zenith X2 (WHE00097) is a climbing-style safety helmet, not a basic hard hat. Traditional hard hats are usually Type I (top impact only) with no chinstrap. The Zenith X2 is ANSI Z89.1 Type I and Type II (top and lateral impact), Class E for electrical hazards, and also EN 12492 certified with a retention chinstrap that keeps it on during a fall. It adds impact performance down to -30 °C, Hydrocool® moisture-wicking comfort padding, four headlamp clips, and harness attachment — features a conventional hard hat lacks. It ships free from Industrial Safety Products.