Yes. The Frontline Weld/Bolt-on Steel and Concrete Anchor (SBW01) is a versatile, multi-purpose anchor rated for a 5,000 lbf / 22 kN minimum breaking strength and a 310 lb maximum user capacity. It can be installed in most structural steel or concrete substrates that can withstand the required 5,000 lb load, so a single anchor design covers both material types. It's small, compact, and lightweight — virtually fitting in the palm of your hand — and installs in minutes with minimal effort and tools. When bolted on it's reusable and can be moved from one location to the next, making it a strong choice for crews who anchor in multiple spots. It ships with free shipping from Industrial Safety Products.

The Frontline Weld/Bolt-on Steel and Concrete Anchor (SBW01) meets or exceeds ANSI Z359.18, ANSI A10.32, OSHA 1926.502, and OSHA 1910. It has been tested by an independent third-party lab accredited to ISO/IEC 17025, and is rated for a 5,000 lbf / 22 kN minimum breaking strength with a 310 lb maximum user capacity.

The Frontline SBW01 offers two installation methods. It can be welded on for a permanent anchor point, or bolted on — and the bolt-on application makes it reusable, so you can remove it and take it to the next location. Either way it installs in just minutes with minimum effort and tools, into most structural steel or concrete substrates that can withstand the required 5,000 lb load. Because it's tested for multi-direction loading, you can install it and tie off in multiple directions.

The Frontline Weld/Bolt-on Steel and Concrete Anchor (SBW01) has a minimum breaking (tensile) strength of 5,000 lbf / 22 kN and a maximum user capacity of 310 lbs. Its base is approximately 1/4" thick (± 1/4"). It is designed to be installed only in steel or concrete substrates that can themselves withstand the required 5,000 lb load.

Yes. The Frontline SBW01 is a multi-purpose anchor built for both structural steel and concrete applications — it can be installed in most steel or concrete substrates that withstand the required 5,000 lb load. It has also been tested for multi-direction loading, so you can install it and tie off in multiple directions, giving it flexibility across a variety of fall protection setups.

The Frontline SBW01 is made of ASTM-rated steel for reliable, robust construction, and it is zinc-plated for corrosion resistance. This combination gives it durable strength for use across steel and concrete jobsites while resisting rust and wear over time.

Yes. The Frontline SBW01 is small, compact, and lightweight — it virtually fits in the palm of your hand — so it's easy to carry from one job to the next. When used as a bolt-on anchor it's fully reusable, letting you remove it and relocate it to another anchoring point. It installs in minutes with minimal tools and is available at Industrial Safety Products with free shipping.

It depends on whether you need a permanent or a movable anchor. Welding the Frontline SBW01 on creates a fixed, permanent anchor point. Bolting it on makes it reusable — you can remove it and take it to the next location, so one anchor covers many spots instead of leaving hardware behind. Both methods deliver the same 5,000 lbf / 22 kN breaking strength and 310 lb user capacity, install in minutes, and work on steel or concrete substrates rated for the load. Choose weld-on for a permanent point, bolt-on for portability and reuse.