Yes. The Frontline STW01 Weld-on Anchor is a compact steel anchor built to be welded onto structural steel for a permanent fall protection tie-off point. It carries a 5,000 lbf / 22 kN minimum breaking strength and a 310 lb maximum user capacity, and can be installed in most structural steel substrates that can themselves withstand the required 5,000 lb load. It's small, lightweight (about 1 lb), and virtually fits in the palm of your hand, and it comes ready to use straight out of the bag once properly welded on. For crews who need a robust, low-profile anchor on steel structures, it's a strong choice — and it ships with free shipping from Industrial Safety Products.

The Frontline STW01 Weld-on Anchor meets or exceeds ANSI Z359.18, ANSI A10.32, OSHA 1926, and OSHA 1910. It has been tested by an independent third-party lab accredited to ISO/IEC 17025, and is rated for a 5,000 lbf / 22 kN minimum breaking strength with a 310 lb maximum user capacity.

The Frontline STW01 is a weld-on anchor: it is welded onto structural steel to create a permanent anchor point. Frontline states the welding is performed by AWS certified welders and processes to ensure quality welds and full compliance. It can be installed in most structural steel substrates that can withstand the required 5,000 lb load, and it arrives ready to use straight out of the bag once the proper weld to structural steel is completed. Always consult the product manual for installation.

The Frontline STW01 Weld-on Anchor has a minimum breaking (tensile) strength of 5,000 lbf / 22 kN and a maximum user capacity of 310 lbs. It is designed to be welded only onto structural steel substrates that can themselves withstand the required 5,000 lb load. The anchor has a 3/8" base thickness and weighs about 1 lb.

The Frontline STW01 is made of ASTM A36 steel for reliable, robust construction and quality. Its steel build gives it the durability needed to be welded onto structural steel and serve as a dependable fall protection anchor point. It has a 3/8" thick base and a rated service temperature range of -30°F to +130°F.

The Frontline STW01 is small, compact, and lightweight — it virtually fits in the palm of your hand. It weighs about 1 lb, has a 3/8" thick base, and measures roughly 3" (76 mm) wide by 5" (127.5 mm) tall, with a 1" (25 mm) diameter ring. Its low-profile size makes it easy to carry and weld into place, and it's available at Industrial Safety Products with free shipping.

The Frontline STW01 Weld-on Anchor has a rated service temperature range of -30°F to +130°F, so it holds up across cold and hot jobsite conditions. It is made of ASTM A36 steel, carries a 5,000 lbf / 22 kN minimum breaking strength, and is rated for a 310 lb maximum user capacity.

The Frontline STW01 is a permanent anchor. Because it is welded directly onto structural steel, it becomes a fixed, dedicated tie-off point rather than a removable one — if you need a reusable or relocatable anchor, Frontline's bolt-on style anchors are the better fit. The STW01's advantage is a robust, low-profile permanent anchor that installs ready to use straight out of the bag once welded on by AWS certified welders, at 5,000 lbf / 22 kN strength and a 310 lb user capacity.