Yes. The Frontline ROB01 Bull Ring is a compact, reusable roof anchor built for most flat wooden roof structures, rated for a 5,000 lb minimum breaking strength and a 310 lb (140 kg) maximum user capacity. It supports fall arrest, fall restraint, and positioning applications, comes with its screws included, and sets up in just minutes straight out of the bag. It meets or exceeds ANSI Z359.18, ANSI A10.32, OSHA 1926, and OSHA 1910, and is third-party lab tested (ISO/IEC 17025-accredited). It's available at Industrial Safety Products with free shipping.

The Frontline ROB01 Bull Ring Reusable Roof Anchor meets or exceeds ANSI Z359.18 (anchorage connectors), ANSI A10.32 (fall protection for construction), OSHA 1926 (construction), and OSHA 1910 (general industry). It has been tested by an independent third-party lab accredited to ISO/IEC Standard 17025. It is rated for a 5,000 lb minimum breaking strength with a 310 lb (140 kg) maximum user weight.

The Frontline ROB01 has a minimum breaking strength of 5,000 lbs and a maximum user capacity of 310 lbs (140 kg). Its top is a welded steel bar with an O-ring rated to 5,000 lbs, and the anchor weighs about 2.5 lbs with a 9 mm (≈3/8") base. It's engineered as a high-strength, reliable anchor point for fall arrest, restraint, and positioning on wooden roofs.

The Frontline ROB01 installs in minutes: it comes with its screws included, so it's ready to fasten to a flat wooden roof structure straight out of the bag. Yes, it is reusable — the anchor itself can be removed and used again, but the screws must be replaced with new fasteners each time it is installed in a new substrate location. Its small, compact profile makes it fast to set up and easy to relocate across a job.

The Frontline ROB01 is built from ASTM A36-rated steel with a galvanized (zinc-plated) finish for better corrosion protection, and its O-ring is galvanized steel. This makes it a high-strength, rugged, and reliable anchor that holds up to outdoor roof environments. Its top is a welded steel bar with an O-ring rated to 5,000 lbs.

The Frontline ROB01 Bull Ring anchor weighs about 2.5 lbs and is small and compact, so it's easy to carry and quick to set up in minutes. It comes with its screws included and installs straight out of the bag, and its reusable design lets you relocate it from one roof to the next. It's available at Industrial Safety Products with free shipping.

Yes. The Frontline ROB01 Bull Ring Reusable Roof Anchor is rated for all three: fall arrest, fall restraint, and positioning applications on flat wooden roof structures. It provides a 5,000 lb minimum breaking strength anchor point with a 310 lb (140 kg) maximum user capacity and meets or exceeds ANSI Z359.18, ANSI A10.32, OSHA 1926, and OSHA 1910.

For crews that anchor repeatedly, yes. Unlike a single-use or leave-behind anchor, the Frontline ROB01 Bull Ring is designed to be removed and reused — you simply replace the screws and reinstall it at the next flat wooden roof location. It's compact (about 2.5 lbs), sets up in minutes with the included screws, and is rated to a 5,000 lb minimum breaking strength with a 310 lb user capacity. It meets ANSI Z359.18, ANSI A10.32, OSHA 1926, and OSHA 1910, and is third-party lab tested to ISO/IEC 17025 — a durable, cost-effective anchor point that travels from job to job.