Yes. The Frontline CO2NN is a non-penetrating counterweight anchor, meaning it holds a worker's fall arrest or restraint system in place using its own weight instead of bolts or fasteners — so nothing penetrates the roof. That makes it ideal for finished roofs and membranes or any substrate where drilling isn't allowed. It includes protective pads and EPDM fittings to guard the roof surface, works on roofs with up to a 5° pitch, and arrives fully assembled and ready to use.

The Frontline CO2NN Counterweight Anchor System meets or exceeds OSHA 1910, OSHA 1926, and EN 795:2012. It is rated for a maximum user capacity of 310 lbs and is designed for one worker in either a fall arrest or a fall restraint application.

A counterweight anchor provides a rooftop tie-off point using mass instead of penetration. The Frontline CO2NN weighs approximately 806 lbs, and that ballast holds the anchor in position so a worker can connect a self-retracting lifeline (SRL), lanyard, or lifeline to its 360° swiveling D-ring. Because it doesn't bolt into the roof, it can be placed on finished roofs and moved as needed, while protective pads and EPDM fittings protect the substrate.

The Frontline CO2NN supports one worker and can be used for either fall arrest or fall restraint, up to 8 feet away from the roof edge (per the manufacturer's spec sheet). Its maximum user capacity is 310 lbs. It is designed to be used with compatible SRLs, lanyards, or lifelines connected to its 360° swiveling D-ring.

The Frontline CO2NN is compatible with roofs of up to a 5° pitch. It is intended for low-slope and flat finished roofs where a non-penetrating anchor is preferred, and it sits on protective pads and EPDM fittings that increase friction and protect the roof surface.

The Frontline CO2NN weighs approximately 806 lbs. It's designed to be moved: it includes four lifting/picking points so it can be safely rigged and lifted to a roof, plus ergonomic carry handles that help crews reposition the weights while avoiding pinch injuries. It ships fully assembled and ready to use straight out of the box.

The Frontline CO2NN has a 360° swiveling D-ring designed for use with compatible self-retracting lifelines (SRLs), lanyards, or lifelines. The swiveling D-ring improves usability and mobility by letting the connected line rotate freely with the worker's movement. It supports one worker at up to 310 lbs.

A counterweight anchor avoids drilling into or fastening to the roof, so there are no penetrations to seal or to void a roof warranty — a key advantage on finished roofs and membranes. The Frontline CO2NN adds protective pads and EPDM fittings to shield the substrate, a hot-dipped galvanized anchor plus an electrostatic anti-corrosion paint coating on the weights for durability outdoors, and portability via four lifting points and ergonomic handles. It meets OSHA 1910/1926 and EN 795:2012 for one worker up to 310 lbs.

The Frontline CO2NN Counterweight Anchor System is available at Industrial Safety Products (industrialsafetyproducts.com) with free shipping. It ships fully assembled and ready to use out of the box.