Yes. The BW DX-MCLP IntelliDoX is an automated docking, bump test, and calibration station for Honeywell BW GasAlert MicroClip 4-gas detectors. You simply place a detector in the module and it automatically runs the tasks you configure — bump tests, calibration, and reconfiguring high/low alarm set points — while logging every result for compliance. For safety teams that need documented, repeatable maintenance without doing each step by hand, it's a strong fit, and it performs the quickest bump test in the industry to keep monitors in service. It includes free shipping at Industrial Safety Products.

The BW DX-MCLP (Customer Part # DX-MCLP) is an IntelliDoX docking module — an automated instrument management station for Honeywell BW GasAlert MicroClip gas detectors. Placed in the dock, a detector automatically performs the activities you set in the software: bump tests, calibration, alarm set-point changes, and noncompliance flagging when a bump test is due. It also stores data, runs reports, tracks compliance, and can send email reminders to workers, combining smart docking hardware with device-management software.

The BW DX-MCLP IntelliDoX docking station is designed for the Honeywell BW GasAlert MicroClip series 4-gas detectors — specifically the MicroClip XT, MicroClip XL, and MicroClip X3. This module is the MicroClip version of the IntelliDoX system; other IntelliDoX modules cover other BW detector families, but the DX-MCLP is matched to the MicroClip line.

The BW DX-MCLP IntelliDoX performs a fast bump test in about 10 seconds and a standard bump test in about 40 seconds — Honeywell calls it the quickest bump test in the industry, which increases uptime and avoids wasted calibration gas. It communicates with the docked detector using two-way infrared (IR), so results transfer automatically without cables between the dock and the instrument.

The BW DX-MCLP IntelliDoX is managed with Honeywell's Fleet Manager II or Honeywell Safety Suite device-management software. From the software you configure what each dock does, analyze data from each gas detector, run reports, track compliance, and even send automatic email reminders to workers. It has 2 GB of internal data storage, and data transfers to a computer by Ethernet or USB.

Yes. The IntelliDoX system is expandable to five docking modules that can operate independently while sharing power, a network connection, and calibration gas. Because each module has its own LCD and keypad, you can gang several together and run different activities on different detectors at the same time — useful for servicing a fleet of MicroClip monitors at one bench.

The BW DX-MCLP IntelliDoX runs on a 12 V / 8.33A ITE power supply and has 2 GB of internal data storage. It sets up with a network or USB drive without tools, transfers data by Ethernet or USB, uses a demand-flow regulator at 350 mL/min, is wall-mountable, and is rated IP20. It also carries EMC (2014/30/EU), Low Voltage (2014/35/EU), FCC Part 15, and ICES-003 Canadian EMI compliance, plus a full two-year warranty.

The BW DX-MCLP IntelliDoX automates and documents detector maintenance to support compliance. It enables bump-test tracking, email notices, and easy recordkeeping, lets you change alarm set points, and can set a noncompliance indicator when a bump test is due. All activity is logged in Fleet Manager II or Honeywell Safety Suite, where you can run reports and track compliance across your MicroClip fleet.

Yes — the BW IntelliDoX Enabler Kit is required to operate the DX-MCLP IntelliDoX docking station. Beyond that, setup needs no tools: you configure it with a network connection or a USB drive. It runs on the included 12 V / 8.33A ITE power supply and connects to your computer by Ethernet or USB for managing detectors and downloading records.

For most gas-detection programs, yes. Manual bump testing and calibration are slow and easy to skip or mis-record. The BW DX-MCLP IntelliDoX automates the cycle for GasAlert MicroClip detectors — running the quickest bump test in the industry (about 10 seconds in fast mode), logging every result, flagging noncompliant instruments, and sending email reminders. Up to five modules can share power, network, and calibration gas, so it scales for fleets while cutting labor and wasted gas compared with servicing each monitor by hand.

The BW DX-MCLP IntelliDoX Docking Station for the GasAlert MicroClip series (MCXL) is available at Industrial Safety Products (industrialsafetyproducts.com) with free shipping. It carries a full two-year warranty. Note that the BW IntelliDoX Enabler Kit is required to operate the docking station.