Yes. The 3M DBI-SALA Salalift II 8102001 is a manually operated confined space winch built specifically for raising and lowering workers and materials into and out of confined spaces such as tanks, vaults, and manholes. It has a 6:1 gear ratio for smooth, controlled cranking, a 350 lb (159 kg) weight capacity, and 60 ft (18 m) of 1/4 in (6.3 mm) galvanized steel wire rope. A free-wheel mode lets the worker move freely within the space, while an overload clutch is designed to lock up in the event of a fall. It meets OSHA 29 CFR 1910.146 and OSHA 29 CFR 1926 Subpart AA for confined spaces, and is available with free shipping at Industrial Safety Products.

The 3M DBI-SALA Salalift II 8102001 winch has a rated weight capacity of 350 lbs (159 kg). It is designed to raise and lower a worker or materials in confined space entry and rescue applications, using 60 ft (18 m) of galvanized steel wire rope and a 6:1 gear ratio for controlled operation.

The 3M DBI-SALA 8102001 Salalift II winch comes with 60 ft (18 m) of 1/4 in (6.3 mm) galvanized steel wire rope. The galvanized construction resists corrosion, and the winch also features a level wind system that lays the cable evenly on the drum plus a reserve lifeline retention system so line stays on the drum. The swiveling snap hook includes a built-in impact indicator.

The 6:1 gear ratio on the 3M DBI-SALA Salalift II 8102001 is a mechanical advantage that lets one person raise or lower a load with far less effort — each turn of the hand crank moves the load a shorter, controlled distance. This makes entry and extraction smooth and steady, which is critical when lifting an incapacitated worker out of a confined space.

The 3M DBI-SALA Salalift II 8102001 has a free-wheel mode that lets the cable pay out freely so the worker can move around inside the confined space without cranking. If a fall occurs, the built-in overload clutch is designed to lock up, holding the worker and enabling controlled retrieval. This combination gives ease of movement during normal work and fall protection when it is needed.

Yes. The 3M DBI-SALA Salalift II 8102001 winch meets OSHA 29 CFR 1910.146 (permit-required confined spaces) and OSHA 29 CFR 1926 Subpart AA (confined spaces in construction). Industrial Safety Products also lists it as meeting or exceeding ANSI Z117.1 for confined space safety and the manufacturer's general requirements. It should be used as part of a complete engineered entry and retrieval system.

Yes — in most overhead entries. The 3M DBI-SALA Salalift II 8102001 is a portable winch that mounts to a confined space system via its included quick mount bracket, but the tripod or davit rescue system it attaches to is ordered separately. The winch provides the raising and lowering mechanism; the tripod or davit provides the overhead anchor point above the confined space opening.

The 3M DBI-SALA Salalift II 8102001 is equipped with i-Safe, an integrated RFID chip. It lets safety managers electronically log and track inspections of the winch using a compatible reader, so equipment records and periodic inspection dates stay accurate — helpful for OSHA and ANSI compliance across a fleet of gear.

The 3M DBI-SALA Salalift II 8102001 winch weighs about 38 lb and is a portable unit that mounts with an included quick mount bracket, so it can be moved between confined space entry points and job sites. Its zinc-plated and anodized steel construction is corrosion resistant for durability in demanding environments.

Unlike a generic utility winch, the 3M DBI-SALA Salalift II 8102001 is engineered specifically for confined space personnel work. It combines a free-wheel mode and overload clutch designed to lock in a fall, a reserve lifeline retention system, a level wind, a swiveling snap hook with impact indicator, and i-Safe RFID inspection tracking — features a basic hand winch lacks. It is rated for a 350 lb (159 kg) load and built to OSHA 1910.146 and 1926 Subpart AA confined space requirements, backed by DBI-SALA's decades of field-proven rescue systems.

The 3M DBI-SALA Salalift II 8102001 winch features anodized yellow and black finishes on durable zinc-plated and anodized steel construction, with a zinc-plated steel hook. The materials are chosen for corrosion resistance and long service life in construction, utilities, oil and gas, mining, and general industrial confined space work. It ships with free shipping from Industrial Safety Products.