3M 2097 P100 Particulate Filter
P100 particulate filter helps provide respiratory protection in environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapor relief. Use with 3M Half and Full Facepieces according to NIOSH approvals. Nuisance level relief from organic vapors. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limit, whichever is lower. Use with 3M Reusable Respirators 5000 Series or 3M Cartridge 6000 Series with 3M Adapter 502, 3M Respirators 6000, 7000 and FF-400 Series with bayonet filter holders. Filters can be used in a wide range of applications, including: welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepiece respirators or 50 times PEL with full facepiece respirators. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode.
Features and Specs:
- NIOSH-approved P100 particulate filter
- Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
- Versatile protection against many oil and non-oil based particulate contaminants
- Nuisance odor relief for organic vapor levels below the Permissible Exposure Level (PEL)
- Bayonet compatibility allows use with many 3M™ half and full facepiece designs
For industrial/occupational use only. Not for consumer sale or use
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.