MSA Latchways Personal Rescue Device (PRD) with EVOTECH Full Body Harness & Quick-Connect Leg Straps

MSA has revolutionized the rescue process with the development of the Latchways PRD—an integrated harness system allowing self-rescue. The lightweight, unobtrusive rescue device is contained in a small ‘backpack’ attached to a full body harness and is designed to be used in conjunction with a fall protection system or anchor point.

In the event of a fall the Latchways PRD harness suspends the user and then allows a gentle lowering to the ground in a controlled descent. The device features a 65 ft. (20 m) spool of Aramid rope which is released at a controlled rate through an integral braking mechanism. The innovative design uses quality components and a limited number of moving parts to enable 100% mechanical integrity.

The Latchways PRD has been designed to be user-friendly so pre-use checks are minimal. The descent device, harness and backpack should be checked for any signs of: use (a descent has been performed), damage, corrosion, chemical attack Periodic examination is required at least annually or more frequently to adhere with corporate PPE inspection schedules.

The MSA Latchways PRD consists of a full-body harness and integral descender device that conforms to all required standards.

Additionally the Latchways Rescue Pole is designed to be used by a third party. Should the user be unable to conduct a selfrescue, the third party can activate the Latchways PRD’s built-in secondary descent release mechanism. The overall length of the pole is 2.7 ft. (800 mm) when retracted and 11.1 ft. (3400 mm) when extended.

Meets or Exceeds ANSI Z359.11:2014, CSA Z259.10-12, ANSI Z359.4:2013, CSA Z259.2.3-12, OSHA

Features:

• Significantly reduces rescue time
• Always available
• Self-activated
• Intuitive use
• Clear rescue plan
• Improves user safety
• Descent Height: 65 ft.
• User Weight: 130 – 310 lbs.
• Descent Speed: 4.1 ft. (1.25 m) per second
• Secondary Release Mechanism: Should the user not be able to rescue themselves, the device can be activated by a third party
• Component Parts Descent line made from Aramid rope: (UHMwPE rope with Aramid overbraid)
• The backpack and harness are:
  • waterproof and dustproof IP56 (Ingress Protection), 
  • -40° F to +140° F (-40° C to +60° C) Operating temperature
  • Successfully assessed against ATEX category Ex II 2 G c IIC T3.