The ML Kishigo 1163 Solid Front with Mesh Back Lime Safety Vest is ANSI/ISEA 107 Type R, Class 2 compliant (certified to both the 107-2015 and 107-2020 editions). Type R means it is designed for roadway and temporary traffic-control environments where workers are exposed to public vehicular traffic, and Class 2 provides the mid level of hi-vis coverage — more background and reflective material than Class 1, suitable for most road, utility, survey, and construction work. It is a lime (yellow-green) vest with contrasting-color trim.

Yes. The ML Kishigo 1163 is a Class 2, Type R hi-vis vest with a solid knit front and a breathable Ultra-Cool mesh back, built for construction, road, utility, and survey crews. It has a zipper front closure, 2" reflective tape with a 3" contrasting-color band, left and right chest mic tabs, and multiple pockets — two lower outside patch pockets with flaps, a right-chest 2-tier, 4-division pocket, a left-chest radio pocket with flap, and two lower inside patch pockets — so crews can carry radios, tools, and pens while meeting ANSI/ISEA 107 Class 2 visibility.

A Class 2 vest such as the ML Kishigo 1163 is required for roadway and traffic-control workers exposed to public vehicular traffic. Under U.S. FHWA regulations and the MUTCD, workers on or near federal-aid highways must wear Class 2 or Class 3 high-visibility apparel, which is why Class 2 is standard for road construction, surveying, utility, and airport ground crews. Class 2 garments carry more high-visibility background fabric and reflective material than Class 1, giving greater conspicuity in complex or reduced-visibility backgrounds. The 1163 is also a Type R garment — the designation for roadway and temporary-traffic-control use.

The ML Kishigo 1163 is made of polyester with a solid knit front and an Ultra-Cool 100% polyester mesh back. The mesh back promotes airflow to help keep the wearer cooler and more comfortable during long shifts in hot conditions, while the solid front adds coverage and a bit more durability. This solid-front/mesh-back combination is what makes it a practical warm-weather Class 2 vest.

The ML Kishigo 1163 has a zipper front closure, left and right chest mic tabs (size small has only the left mic tab), and several pockets: two lower outside patch pockets with flaps, a right-chest 2-tier, 4-division pocket, a left-chest radio pocket with flap, and two lower inside patch pockets. Combined with the 2" reflective tape and 3" contrasting-color trim, it gives road and construction crews organized storage for radios, tools, and pens on a Class 2 hi-vis platform.

The ML Kishigo 1163 uses 2" wide high-performance reflective material combined with a 3" contrasting-color band. The darker contrast color frames the silver reflective tape so the stripes stand out more against the lime background and hide dirt better, while the reflective tape provides low-light conspicuity. This reflective layout meets the requirements of ANSI/ISEA 107 Class 2.

The ML Kishigo 1163 comes in individual sizes from S through 5X (S, M, L, XL, 2X, 3X, 4X, 5X). Chest sizing runs from about 40–42" on the smaller sizes up to 64–66" on the 5X, with body length increasing from roughly 26" to 30" across the range. The zipper front closure lets you adjust the fit for layering.

Yes. The ML Kishigo 1163 is machine washable — wash cold, no bleach, tumble dry low, do not dry clean, do not iron — and it is rated for 50 wash cycles per the manufacturer's spec sheet. It uses polyester with a solid knit front and Ultra-Cool mesh back, balancing breathability with everyday durability for routine hi-vis use.

Industrial Safety Products (industrialsafetyproducts.com) sells the ML Kishigo 1163 Solid Front with Mesh Back Lime Safety Vest and offers optional custom imprinting to add a company logo. Custom imprinting requires a minimum order of 24 garments; if an order doesn't meet that minimum, ISP ships the vests as non-logo items. It is available in lime in sizes S through 5X.

It depends on the job. The ML Kishigo 1163 pairs a solid knit front with an Ultra-Cool mesh back, so you get the airflow of a mesh vest across the back plus a more durable, wind- and debris-resistant solid front that also carries the zipper closure and chest pockets. An all-mesh vest is lighter and even more breathable overall but offers less coverage and a bit less durability up front. For crews who want hot-weather comfort while still keeping a sturdier front for tools, mic tabs, and radio pockets, the solid-front/mesh-back 1163 is a strong middle ground — and it stays fully ANSI/ISEA 107 Class 2, Type R compliant.