Yes. The Milwaukee BOLT Front Brim helmet meets or exceeds ANSI/ISEA Z89.1 Type 2, Class C — Type 2 means it protects against both top and side impacts, unlike a standard Type 1 hard hat, which only guards the top of the head. It adds a comfortable padded suspension with an adjustable swinging ratchet, a 5-buckle adjustable chin strap, and a BOLT™ accessory system (4 BOLT slots plus 2 universal slots) that lets you mount a headlamp or marker clip directly — making it a strong upgrade for construction, utility, and trades workers who want side-impact protection and jobsite accessory options.

The Milwaukee BOLT Front Brim Vented Safety Helmet meets or exceeds ANSI/ISEA Z89.1, Type 2, Class C. Type 2 certifies protection against both top and lateral (side) impacts, and Class C indicates a vented, non-electrical-rated design. It's also listed as UL Third-Party Tested and Certified.

The BOLT™ system on the Milwaukee BOLT Front Brim helmet is a set of four BOLT™ accessory slots plus two universal accessory slots built into the shell, letting you attach compatible personal protective equipment and accessories directly to the helmet. Every helmet also includes a MILWAUKEE® BOLT™ Headlamp Mount that works with most headlamps for a secure, easy attachment, and a BOLT™ Marker Clip for quick access to pens and markers on the jobsite.

Generally, no. Under ANSI/ISEA Z89.1, a Class C helmet is typically a vented, conductive design with no dielectric (electrical) rating, unlike Class E or Class G helmets, which are tested for specific voltage protection. The Milwaukee BOLT Front Brim is listed as Type 2, Class C, so it should not be relied on for protection near exposed electrical hazards — workers with electrical exposure should confirm the specific electrical rating needed and choose a helmet certified for it.

Per Industrial Safety Products' listing, the Milwaukee BOLT Front Brim helmet meets the Energy Absorption Capacity clauses (4.2.1.2 Front, 4.2.1.3 Side, 4.2.1.4 Rear) and Retention System clauses (4.2.3 Strength, 4.2.4 Effectiveness) of EN12492:2012 — a European standard originally developed for mountaineering/climbing helmets that tests impact absorption from multiple directions and chin-strap retention strength. Referencing these specific EN12492:2012 clauses alongside its primary ANSI/ISEA Z89.1 Type 2, Class C certification suggests the helmet's shell and chin-strap retention were tested to that additional benchmark, though this combination is unusual for a construction hard hat and is worth confirming directly with Milwaukee if it matters for your compliance needs.

The listing shows seven color options: white, yellow, blue, red, black, orange, and gray. The product photos on the listing show the white version.

Yes to both. The Milwaukee BOLT Front Brim helmet ships with free shipping at Industrial Safety Products. Custom logo printing is available on orders of 20 or more hard hats, and a set-up fee may apply (unlike some other ISP products, it isn't guaranteed free). Pricing runs $6.60 per location for a single color on the front, or $10.90 per location for up to 4 colors — with bundled options covering the front and back ($21.80) or all four sides ($43.60). Orders below the 20-unit minimum ship as standard, non-logo helmets.

The BOLT Front Brim adds a built-in accessory system — four BOLT™ slots and two universal slots, plus an included BOLT™ headlamp mount and BOLT™ marker clip — on top of its ANSI/ISEA Z89.1 Type 2, Class C side-and-top impact protection. It also has a comfortable padded suspension with an adjustable swinging ratchet, a 5-buckle adjustable chin strap, and an antimicrobial, moisture-wicking, machine-washable sweatband and liner. A basic Type 2 hard hat typically doesn't include integrated accessory mounting or this level of adjustable comfort.

The Milwaukee BOLT Front Brim helmet shell is made of high-density polyethylene (HDPE) and measures 12 inches long, 9 inches tall, and 6.5 inches wide. It's made in the USA with globally sourced materials and is UL third-party tested and certified. The chin strap, suspension, sweatband, and liner are all replaceable.

Yes. The Milwaukee BOLT Front Brim helmet includes an antimicrobial, moisture-wicking sweatband and helmet liner designed to prevent odor and bacteria build-up. Both the sweatband and liner — along with the chin strap and suspension — are removable and machine washable, and all four are listed as replaceable parts.