Yes. The MaxiFlex 34-875 Ultimate is built as the benchmark for precision handling in dry environments, and unlike the palm-and-fingers-only 34-874, its MicroFoam nitrile coating wraps the palm, fingers AND knuckles for added abrasion protection on the back of the hand. The 15-gauge seamless nylon/elastane knit gives a thin, dexterous, "hand at rest" fit that reduces fatigue, while smooth rounded fingertips improve sensitivity for handling, assembly, sorting of small parts, finishing, and parts inspection. It carries ANSI/ISEA 105 ratings of Cut A1, Abrasion 4, Puncture 2 (EN 388: 4131X), so it targets dexterity and abrasion durability rather than high cut resistance.

The main difference is coating coverage. The MaxiFlex 34-874 has its MicroFoam nitrile coating on the palm and fingers only, while the 34-875 extends that coating to the palm, fingers AND knuckles — adding abrasion protection and grip across the back of the fingers and knuckle area. Both are the same ATG Ultimate platform: 15-gauge seamless nylon/elastane knit, 360° breathable MicroFoam nitrile, touchscreen compatible, and rated ANSI/ISEA Cut A1 / Abrasion 4 / Puncture 2 (EN 388 4131X). Choose the 34-875 when your work also contacts surfaces with the top of the hand; choose the 34-874 for the lightest, most breathable palm-focused option.

The MaxiFlex 34-875 Ultimate is rated to ANSI/ISEA 105 (2024) at Cut Level A1, Abrasion Level 4, and Puncture Level 2, and to EN 388:2016 at 4131X. In practical terms that means strong abrasion resistance (Level 4 of 6) and moderate blunt-puncture resistance (Level 2 of 5), with entry-level cut resistance (A1). It is an abrasion-and-dexterity glove, not a high cut-resistant glove.

MicroFoam nitrile is ATG's patented micro-cup foam coating, applied on the 34-875 across the palm, fingers, and knuckles. Its micro-cup finish is compatible with light oils and delivers a controlled, confident grip plus excellent abrasion resistance. Because the foam structure is porous, the glove provides 360° breathability — ATG markets it as one of the most breathable coated gloves available — keeping hands cooler and drier than solid-coated gloves. It is also about 25% thinner than most foam nitrile gloves while offering roughly twice the mechanical performance.

Only at an entry level. The MaxiFlex 34-875 is rated ANSI/ISEA Cut Level A1 (the lowest of the A1–A9 scale) and EN 388 cut level 1. It is built for dexterity, abrasion resistance, and breathability in dry precision work — not for tasks with meaningful cut or laceration hazards. For higher cut protection, choose a glove rated A2 or above.

Yes. The MaxiFlex 34-875 is touchscreen compatible, letting you operate a smartphone, tablet, or touch-screen device without removing your gloves. Combined with its thin 15-gauge build and sensitive rounded fingertips, it keeps you productive on tasks that mix hands-on work with device use.

The MaxiFlex 34-875 is available in a size range from XXS to XL. It comes in gray with a black MicroFoam nitrile coating on the palm, fingers, and knuckles. At Industrial Safety Products it is sold by the pair (each) or by the dozen, and a tri-folded, shrink-wrapped vending version (34-875V) is also available for dispensing.

Yes. The MaxiFlex 34-875 is both silicone-free and latex-free, eliminating latex-allergy risk. It is certified skin-safe by the Oeko-Tex® Association from first contact with the skin and has earned professional dermatological accreditation from the Skin Health Alliance. Consistent liner penetration by the nitrile leaves only the soft knit liner resting against the skin for all-day comfort, and all materials are REACH compliant.

Yes. The MaxiFlex 34-875 complies with FDA food-handling requirements under 21 CFR Part 177 and is also CFIA compliant. Being silicone-free, latex-free, and certified skin-safe by Oeko-Tex®, it suits food-contact and light-assembly environments where material compliance matters. (Always confirm the glove fits your specific facility's food-safety program.)

Yes. The MaxiFlex 34-875 is reusable and launderable, and is actually laundered before final packaging so it arrives clean and ready to use. Care instructions call for machine washing at 40°C, tumble drying on low heat, and no bleach — helping extend the glove's service life versus disposable options.

Yes. The MicroFoam nitrile coating is compatible with light oils and its micro-cup finish gives a controlled grip, now extended over the knuckles for added coverage. For comfort and value, the 34-875 is about 25% thinner than most foam nitrile gloves while delivering roughly twice the mechanical performance, with 360° breathability, a barehand-like "hand at rest" fit, touchscreen compatibility, and skin-safe (Oeko-Tex®, latex- and silicone-free) materials, plus ANSI Abrasion 4 durability and EN 388 4131X. The trade-off is only entry-level cut protection (A1), so it excels at assembly, inspection, and small-parts handling rather than sharp-edge tasks.