Yes. The KASK WHE00120 Primero Air Hi Viz is a climbing-style safety helmet certified to ANSI Z89.1 Type I, Class C (HT, LT) and tested to selected clauses of EN 12492, the European work-at-height/mountaineering standard (front, lateral and rear impact absorption, penetration, and chinstrap retention). For visibility it adds a high-visibility color shell, luminescent lamp clips and high-visibility reflective decals for low-visibility conditions. A 5-point Advanced Lite chinstrap keeps it on during a slip or fall, and a Ring to Hook loop lets you clip it to a harness. It weighs 0.97 lb and has 14 air intakes. Note: it is Class C (vented), so it is not rated for electrical hazards.

The KASK Primero Air Hi Viz (WHE00120) meets ANSI Z89.1 Type I, Class C, HT, LT. Type I covers top impact; Class C means a vented design with no electrical protection; HT and LT mean it is tested at high and low temperatures. It is also tested to selected clauses of EN 12492: shock energy absorption for front (4.2.1.2), lateral (4.2.1.3) and rear (4.2.1.4) impacts, penetration (4.2.2), retention system strength (4.2.3) and retention system effectiveness (4.2.4). KASK also reports it passed the WG11 rotational impact test.

The KASK Primero Air Hi Viz has three visibility features: a high-visibility color shell, luminescent lamp clips, and high-visibility reflective decals. KASK designed them for added safety in low-visibility conditions. It comes in two colors: White and Yellow Fluo.

No. The KASK Primero Air Hi Viz (WHE00120) is rated ANSI Z89.1 Class C, which means it has no electrical protection. Its 14 air intakes are there for airflow, not dielectric protection. For work with electrical exposure, choose a non-vented ANSI Class E helmet instead. The Primero Air Hi Viz suits construction, work at height, and hot-weather or low-light jobs where there is no electrical risk.

Both, with a nuance. Its ANSI Z89.1 rating is Type I (top impact). Beyond that, KASK tests it to the EN 12492 shock energy absorption clauses for front (4.2.1.2), lateral (4.2.1.3) and rear (4.2.1.4) impacts, plus penetration. The HD polypropylene outer shell and high-density EPS inner shell absorb impact energy from all around. If your site specifically requires ANSI Type II, confirm that before choosing this model.

Yes, it's one size fits most and built for all-day wear. It weighs 0.97 lb and has 14 air intakes shaped to keep debris out, plus a 2Dry liner, a quick-drying moisture-wicking fabric. The Ergo Fit System adjusts with a large-diameter dial and moves up and down to fit different head shapes, with wings that cradle the back of the neck. The 5-point Advanced Lite Chinstrap and a lateral adjustment divider add a tailored fit, and the chinstrap adapts to earmuff use. Padding snaps in and out with KASK's patented Click-In System. The rated temperature of use is -22 °F to +140 °F.

The KASK Primero Air Hi Viz takes most common add-ons. The Easy Click System has integrated slots for KASK eye and face protection (Easy Click Visor Adapters required). Standard 30 mm EURO slots fit KASK earmuffs, and the lamp clips include earplug holders. For lighting, 4 removable nylon lamp clips work with KASK headlamps and industry headlamps with elastic bands. It also has a frontal accessory slot for badge holders and headlamps (with a cap cover for debris) and 3 rear slots for KASK neck protection.

The KASK Primero Air Hi Viz has an HD polypropylene external shell, an HD expanded polystyrene (EPS) internal shell for impact energy absorption, and a soft PA nylon headband. KASK says the shell absorbs impacts especially well at low temperatures (down to -30 °C) and resists yellowing and degradation. The rated temperature of use is -22 °F to +140 °F, and the ANSI HT and LT marks confirm high- and low-temperature testing.

For many workers, yes. A basic hard hat is usually ANSI Type I with no chinstrap. The KASK Primero Air Hi Viz is also Type I, but it adds EN 12492 front, side and rear impact testing, a WG11 rotational impact pass, and a 5-point chinstrap that keeps it on during a fall. It also has reflective hi-viz decals, luminescent lamp clips, 14 air intakes, and slots for visors, earmuffs and headlamps, all at 0.97 lb. KASK backs it with a 3-year guarantee and a 10-year life span. It is Class C, so it's not for electrical work.

It comes in two colors: White and Yellow Fluo. Industrial Safety Products offers optional custom logo imprinting at $6.60 per location for 1 color or $10.90 per location for up to 4 colors. You can use up to four locations: front, back, right and left sides. The minimum order is 20 helmets, and a set-up fee may apply. Orders below the minimum ship without logos. Free shipping is included.