Guardian 01291 Shock Absorbing Tie Back Double Leg Lanyard with Snap Hook 6'

The innovative design of the Guardian Fall Protection Tie-Back Lanyard eliminates the need for a separate anchorage connector. The leg of the Tie-Back Lanyard functions to loop around a compatible anchor point, with the snap hook component connecting to the leg D-ring. The integrated shock absorbing component and snap hook then connect to the full-body harness dorsal D-ring, creating a complete PFAS. The adjustable D-ring tie-back point, as well as the single and double leg options, further increase the versatility of this lanyard.

Meets and Exceeds: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910

Features and Specs:

• Lightweight and durable
• Connect directly to structure
• Weight: 4 lb.
• Length: 6'
• Webbing Material(s) Polyester and nylon
• Worker Capacity Range 130-310 lbs.

Work Positioning:

Internal Shock Lanyard may be used in Work Positioning applications. WorkPositioning systems allow a worker to be supported while in suspension and work freely with both hands. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side.

Rescue/Confined Space:

Internal Shock Lanyard may be used in Rescue/Confined Space applications. Rescue systems function to safely recover a worker from a confined location or after exposed to a fall. There are various configurations of Rescue systems depending on the type of rescue. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable D-rings: Dorsal, Chest, Shoulder

For all applications: worker weight capacity range (including all clothing, tools, and equipment) is 130-310 lbs