Yes. The Frontline Combat Complete Premium Roofers Kit is a ready-to-go, self-sufficient fall protection kit that includes everything needed to start a roof job in one bag: a Combat universal-sizing full-body harness, a nail-on roof anchor, and a vertical lifeline with an integrated self-locking rope grab and shock absorber. It is rated for one person up to 310 lbs, has a breaking strength greater than 5,000 lbs, and meets or exceeds applicable ANSI (Z359.11, Z359.15, Z359.18) and OSHA (1926 and 1910) standards. The harness and lifeline are safety orange for added visibility, and everything ships in a Frontline duffel bag with free shipping.

The Frontline Combat Complete Premium Roofers Kit includes four components: (1) the Combat universal-sizing full-body harness with a single back D-ring for fall arrest; (2) a high-strength steel, powder-coated roof anchor that nails to a wooden structural member; (3) a vertical lifeline with an integrated self-locking rope grab and a shock absorber; and (4) a Frontline duffel bag with carry handles to hold it all. You choose the lifeline length — 25 ft or 50 ft — at checkout. It ships with free shipping.

The Frontline Combat Complete Premium Roofers Kit is rated for 1 person with a maximum capacity of 310 lbs and a breaking strength greater than 5,000 lbs. It meets or exceeds ANSI Z359.11-2014 (full-body harnesses), Z359.15-2014 (single-anchor lifelines and rope grabs), and Z359.18-2017 (anchorage connectors), as well as OSHA 1926 (construction) and 1910 (general industry).

The roof anchor in the Frontline Combat Roofers Kit installs quickly: you adjust it to the roof pitch and nail the steel flaps to a wooden structural member through its 8 nail holes. It is made of high-strength steel with a finished powder coating for durability. Once fastened, it serves as the anchorage point for the vertical lifeline.

The Frontline Combat Roofers Kit lifeline uses a 5/8" twisted Polysteel rope, available in 25 ft or 50 ft lengths, with a snaphook on one end and a stop-knot on the other for added safety. It comes with an integrated forged-steel rope grab that is self-locking when not being adjusted, plus a built-in shock absorber (shock pack) to reduce arresting forces in a fall. The lifeline and rope grab meet or exceed applicable ANSI and OSHA standards.

Yes. The Frontline Combat harness uses universal sizing to fit most users. It offers 5-point adjustability with a chest strap that uses pass-thru buckles and leg straps with tongue buckles for easy adjustment, plus an added back-support strap and a sub-pelvic strap for comfort. It has a single back D-ring for fall arrest, a dual-color scheme so shoulder and leg straps are easy to tell apart, and a fall indicator on the shoulder strap. Lightweight components keep the harness comfortable through the workday.

The fall indicator on the Frontline Combat harness is a built-in tell-tale on the shoulder strap that visually shows whether the harness has been subjected to fall-arrest forces. If the indicator has deployed, it signals the harness was involved in a fall and must be removed from service. It gives a quick pre-use check so workers and supervisors can confirm the harness is safe to wear.

Yes. The Frontline Combat Complete Premium Roofers Kit is designed to meet or exceed OSHA fall-protection requirements for both construction (1926) and general industry (1910) work, and it carries applicable ANSI Z359 certifications (Z359.11, Z359.15, Z359.18). It provides a complete personal fall arrest system — harness, anchorage, and connecting lifeline with energy absorber — which is what OSHA requires for workers exposed to roofing fall hazards. Always follow the manufacturer's user instructions and have a competent person verify the setup.

Yes. Industrial Safety Products offers custom screen printing on the Frontline Combat Roofers Kit harness. Single-color screen printing is available (from $13 per harness) with a minimum order of 10 harnesses, and a set-up fee may apply; a free first-order customization promo is also offered. This is ideal for companies that want branded fall-protection gear for their crews. Free shipping is included.

For a roofing crew, generally yes. The Frontline Combat Complete Premium Roofers Kit bundles a matched harness, roof anchor, and shock-absorbing lifeline with rope grab — all ANSI/OSHA compliant and packed in a carry bag — so you get a complete, self-sufficient fall arrest system out of the box instead of sourcing and matching components yourself. The safety-orange harness and lifeline add visibility, universal sizing fits most workers, and free shipping is included. Buying separately only makes sense if you need a specialty component the kit doesn't cover.

The Frontline Combat Roofers Kit lets you choose a 25 ft or 50 ft vertical lifeline at checkout. Choose 25 ft for lower-slope or shorter vertical runs where you don't need much travel, and 50 ft when you need more reach on taller or steeper roofs or want extra rope to move along the work area. Both use the same 5/8" twisted Polysteel rope with a self-locking forged-steel rope grab and integrated shock absorber.