Yes. The Frontline 250CTB Elite Construction Harness is built with all-aluminum hardware to make it extremely lightweight and comfortable for all-day construction work. It combines perforated shoulder, back, and leg pads with a mesh covering for airflow, integrated suspension trauma straps for added safety after a fall, aluminum quick adjusters on both sides for fast torso-length adjustment, and a reinforced belt with a rigid pad that supports a tool belt without the harness sagging. It meets ANSI/ASSP Z359.11-2021 and OSHA 1926/1910, carries a 310 lb user capacity, and ships free from Industrial Safety Products.

The Frontline 250CTB Elite Construction Harness meets ANSI/ASSP Z359.11-2021, the U.S. standard for full body harnesses, and satisfies OSHA 1926 (construction) and 1910 (general industry) requirements. It was tested by an independent third-party lab accredited to ISO/IEC 17025. Its structural webbing has a breaking strength of 5,000 lbs and a rated user capacity of 310 lbs.

The Frontline 250CTB Elite Construction Harness has a rated maximum user weight capacity of 310 lbs (worker plus tools and equipment), in line with ANSI/ASSP Z359.11-2021. Its webbing carries a breaking strength of 5,000 lbs. The webbing is black polyester with high-tenacity polyester stitching and all-aluminum hardware.

Suspension trauma straps are relief straps built into the Frontline 250CTB harness. After a fall is arrested, a suspended worker can deploy them to create a foothold and stand up, relieving pressure from the leg straps. This restores blood circulation and helps prevent suspension trauma (orthostatic intolerance), a potentially fatal condition that can occur while hanging motionless in a harness waiting for rescue.

The Frontline 250CTB has an aluminum back (dorsal) D-ring that is built to always sit in a vertical position, making it easy to attach a connector for fall arrest. It also includes a separate back web loop attachment used to connect a twin-leg self-retracting lifeline (SRL). Using the web loop keeps the dorsal D-ring free for rescue or for a different SRL when the web loop is not in use, giving workers flexible tie-off options for continuous fall protection.

The Frontline 250CTB Elite Construction Harness comes in three sizes: S (Small), M/L (Medium/Large), and XL/2X. Fit is dialed in with aluminum quick adjusters on both sides for torso length, an aluminum quick-connect buckle on the chest strap, and tongue buckles on the leg straps for fast, secure adjustment.

Yes. The Frontline 250CTB is an Elite Series harness designed for all-day cooling comfort. Its shoulder, back, and leg pads are perforated and covered with a mesh netting to maximize air circulation and breathability, and the leg pads are removable. All-aluminum hardware keeps it extremely lightweight, and redesigned horizontal leg straps improve mobility and comfort during a full workday.

The Frontline 250CTB harness is made of black polyester webbing with high-tenacity polyester stitching and all-aluminum hardware, including an aluminum back D-ring, aluminum quick adjusters, and an aluminum quick-connect chest buckle. The aluminum construction makes it extremely lightweight, and the safety-green contrast stitching makes it easier to perform stitching safety inspections. It is rated to a 5,000 lb webbing breaking strength and a 310 lb user capacity.

Yes. The Frontline 250CTB includes a removable cell phone and radio holder on the left chest strap, so workers no longer have to carry a phone in a pocket or risk losing a radio. The harness also features a reinforced belt with a rigid pad that supports a tool belt without the harness sagging, plus retro-reflectivity trim around the harness for added visibility in low-light work.

Yes. Industrial Safety Products offers custom logo decoration on the Frontline 250CTB harness with a minimum order of 10 harnesses (a setup fee may apply), including single-color screen printing. The harness also ships free.

The Frontline 250CTB Elite goes beyond a basic construction harness. It uses all-aluminum hardware to stay extremely lightweight, adds perforated mesh-covered padding for cooling comfort, and integrates suspension trauma straps, a removable phone/radio holder, retro-reflectivity trim, and a reinforced tool-belt-supporting belt. Its aluminum back D-ring stays vertical for easy connection, and a web loop lets you add a twin SRL while keeping the dorsal D-ring free for rescue. It still meets ANSI/ASSP Z359.11-2021 and OSHA 1926/1910 with a 310 lb capacity, making it a premium option for construction and trades work.

The Frontline 250CTB Elite Construction Harness with Aluminum Hardware and Suspension Trauma Straps is sold by Industrial Safety Products (industrialsafetyproducts.com) with free shipping. It is available in S, M/L, and XL/2X sizes, and custom logo decoration (screen printing) is available on orders of 10 or more harnesses.