Yes. The Fierce Safety SU400R Surveyors Class 2 Vest is built for surveyors, engineers, inspectors, and field crews who carry gear: it has 6 pockets, including a clear-coated ID/badge pocket with a velcro closure, a left note-pad/pen pocket, and two large inside plus two outside pockets at the bottom for larger storage. It's a high-visibility ANSI/ISEA 107-2015 Type R, Class 2 vest in breathable 100% polyester mesh, with a heavy-duty front zipper reinforced with webbing, mic-tab placement on both the left and right chest, and 360° reflective tape. The two-tone black bottom gives it a cleaner, more professional look. It comes in hi-vis red with free shipping.

The Fierce Safety SU400R Surveyors Vest meets ANSI/ISEA 107-2015, as a Type R (Roadway), Class 2 garment. Type R means it is designed for workers exposed to roadway traffic and moving vehicles, and Class 2 specifies the high-visibility background and retroreflective material coverage required for that use. Per Industrial Safety Products and the Fierce Safety spec sheet, the vest was tested by an independent third-party lab accredited to ISO/IEC 17025:2017.

On the Fierce Safety SU400R vest, "Type R, Class 2" refers to its ANSI/ISEA 107-2015 classification. Type R (Roadway) covers workers exposed to traffic from public-access highway rights-of-way or roadway temporary-traffic-control zones. Class 2 is the mid-tier coverage level, requiring more high-visibility background and reflective material than Class 1 — appropriate for surveyors, utility, and construction workers in areas with traffic moving faster than about 25 mph. The vest carries 360° contrast reflective tape for all-around visibility.

The Fierce Safety SU400R vest is made of 100% polyester mesh, which lets air flow through to keep you cooler during long hours in hot conditions. Fierce Safety describes it as top-of-the-line tailoring built with heavy-duty construction to last on site. It also adds a 360° black trim around the whole vest and a two-tone black bottom panel for a clean, professional look.

The Fierce Safety SU400R Class 2 vest has 6 pockets. They include a clear-coated ID/badge pocket with a velcro closure for safe identification storage, a left pocket for a note pad and pen/pencil, and two large inside plus two outside pockets at the bottom for larger storage. It also has mic-tab placement on both the left and right chest and two reinforced grommets for attaching small accessories.

The Fierce Safety SU400R Surveyors Vest comes in hi-vis red with a two-tone black bottom, in sizes M, L, XL, and 2XL. Optional custom imprinting is available through Industrial Safety Products — by screenprinting, heat transfer, or embroidery — on the full back and the left pocket, so you can add a company name or logo. It ships free.

Yes. The Fierce Safety SU400R vest is an ANSI/ISEA 107-2015 Type R, Class 2 high-visibility garment, meaning it is rated for workers exposed to roadway traffic. Its Class 2 hi-vis red background and 360° reflective tape provide the visibility level that flaggers, surveyors, and road and utility crews typically need in traffic zones. It was independently tested by a lab accredited to ISO/IEC 17025:2017.

For surveyors and field crews, yes. A basic Class 2 vest usually just meets the visibility minimum, while the Fierce Safety SU400R adds a work-focused feature set at the same certification: 6 pockets (including a clear-coated velcro ID pocket, a left note-pad/pen pocket, and large inside and outside bottom pockets), dual chest mic tabs, two reinforced grommets, and a heavy-duty front zipper with reinforced webbing. You still get the full ANSI/ISEA 107-2015 Type R, Class 2 rating and breathable 100% polyester mesh, and the two-tone black bottom looks more professional. It ships free.

The Fierce Safety SU400R's black bottom panel and 360° black trim are both practical and cosmetic. The darker lower section and contrasting trim give the vest a clean, more professional look and help disguise scuffs and dirt that show quickly on hi-vis fabric, while the red mesh body and 360° reflective tape keep it fully ANSI/ISEA 107-2015 Type R, Class 2 compliant for high-visibility work. The trim also gives the vest a sharper, more finished appearance than a plain single-color vest.