Yes. The Fierce Safety LU300G is a purpose-built surveyors vest that meets ANSI/ISEA 107-2015 as a Type R, Class 2 high-visibility garment — the tier intended for workers exposed to roadway traffic and construction equipment. It stands out with 360-degree glow-in-the-dark luminescent tape for added low-light visibility on top of 360° contrast reflective tape, a two-tone body for contrast, six pockets (including a tablet-sized inside pocket), four reinforced grommets, mic tabs on both sides, and a back D-ring opening to route a fall-protection harness connection when needed. The 100% polyester mesh keeps it breathable for all-day wear. It ships with free shipping from Industrial Safety Products.

The Fierce Safety LU300G meets ANSI/ISEA 107-2015 as a Type R, Class 2 high-visibility vest, and it was tested by an independent third-party lab accredited to ISO/IEC 17025:2017. Type R designates roadway/traffic exposure and Class 2 is the mid-tier level of hi-vis background and retroreflective material. Both the Industrial Safety Products listing and the Fierce Safety manufacturer spec sheet state the same certification.

Under ANSI/ISEA 107-2015, Type R means the garment is designed for workers exposed to roadway rights-of-way and temporary traffic control zones, and Class 2 specifies the middle level of required high-visibility background fabric and retroreflective tape (more coverage than Class 1, less than the full-body Class 3). On the LU300G, that Class 2 compliance comes from its 360° contrast retroreflective tape; the glow-in-the-dark luminescent tape is an added visibility feature on top of the certified reflective material.

The glow-in-the-dark luminescent tape on the LU300G is photoluminescent striping wrapped around the vest (360 degrees) that absorbs light during the day and glows on its own in dark or low-light conditions — so the wearer stays visible even when there are no headlights or work lights to reflect. It works alongside the vest's 360° contrast retroreflective tape, which lights up when a light source (like vehicle headlights) hits it. Together they give visibility both when illuminated and in the dark, which is what the "Luminous" name refers to.

Yes — the LU300G has a back D-ring opening designed to let a fall-protection harness's dorsal D-ring or connection pass through, so the vest can be worn over a harness and the connection routed to an anchor when needed. Note that this is a pass-through opening for the harness, not a rated anchor point: the vest itself is a hi-vis garment, and fall-arrest connection must always be made to a certified harness and anchorage, not to the vest.

The Fierce Safety LU300G is a 6-pocket surveyors vest. It includes a left inside pocket with a velcro closure sized for large storage such as a tablet or other large accessories, and an inner right pocket for a note pad and pen/pencil. It also adds four reinforced grommets for small accessory attachments and two mic/radio tabs, one on each side, plus a zipper front closure reinforced with durable webbing.

The Fierce Safety LU300G comes in hi-vis green and is available in sizes M, L, XL, and 2XL. It's built from 100% polyester mesh for breathability, with a two-tone body for contrast and a heavy-duty front zipper reinforced with durable webbing.

Yes. The LU300G is made of 100% polyester mesh, which promotes airflow to keep you cool during long periods of wear. Combined with its lightweight two-tone construction and adjustable zip-front fit, it's designed to be worn comfortably through a full workday while still meeting ANSI/ISEA 107-2015 Class 2.

Yes. Industrial Safety Products offers optional custom imprinting on the Fierce Safety LU300G using screen printing, heat transfer, or embroidery, with logo locations such as the full back and left pocket. Custom logo orders require a minimum of 24 garments; if an order doesn't meet that minimum, ISP ships the vests as non-logo items. Free shipping is included.

The LU300G is a premium "luminous" surveyors vest, so beyond the usual ANSI/ISEA 107-2015 Type R, Class 2 retroreflective striping it adds 360-degree glow-in-the-dark luminescent tape for visibility in the dark, plus a back D-ring opening to route a fall-protection harness connection. It keeps the surveyor essentials — six pockets (including a tablet-sized inside pocket), four reinforced grommets, dual mic tabs, a reinforced zip front, and breathable 100% polyester mesh. That combination of glow-in-the-dark visibility and harness-ready design is what separates it from a basic reflective-only vest.

The Fierce Safety LU300G Class 2 Luminous Reflective Premium Surveyors Vest is sold by Industrial Safety Products (industrialsafetyproducts.com) with free shipping. It's available in hi-vis green in sizes M–2XL, meets ANSI/ISEA 107-2015 Type R, Class 2, and can be ordered with an optional custom company logo on orders of 24 or more.