FallTech 82433 WeldTech 6' Shock-Absorbing Lanyards

Meets or Exceeds OSHA CFR1926.502, CFR1910.66 and ANSI Z359.13‐2009

Features and Specs:

• High heat and burn resistance, low conductivity and highly resistant to abrasion.
• Specifically designed for use in hot-work welding environments.
• Constructed with Kevlar webbing and Nomex pack cover.
• Y‐leg lanyard for 100% tie‐off.
• SoftPack shock absorber
• Nomex cover protects shock absorber from damage due to exposure to excessive heat.
• 1‐1/2" Kevlar webbing lanyard legs.
• 3 locking snap hooks at the anchorage ends.

Material Specifications

• Webbing: Kevlar; Min. 10,000 lbs. tensile strength
• Energy Absorber: Polyester; activation greater than 450 lbs.
• Connectors: Alloy Steel; Min. 5,000 lbs. tensile strength
• Connector Gates: Alloy Steel; Min. 3,600 lbs. front and side load

Performance Specifications

• Tensile Strength: Min. 5,000 lbs.
• Max. Capacity: 310 lbs.
• Max. Freefall: 6 feet
• Average Arrest
• Force: Less than 900 lbs.
• Max. Elongation: 48 inches

Warnings

• Read, understand and follow all labels and  instructions prior to use.
• Inspect before each use.
• Remove from service if there is evidence of damage or excessive wear.
• Remove from service if there is any signs of activation.
• Never attach a Shock Absorbing Lanyard to the front or side D‐rings.
• Made to Order Product