Yes. The Lift Safety RADIX Full Brim Vented Safety Helmet is an ANSI Z89.1 Type 2 helmet, meaning it is tested for both top and lateral (side) impacts — unlike a standard Type 1 hard hat, which only guards against top impact. It also carries the European EN12492 standard (front, side, and rear energy absorption plus penetration and retention tests), a 4-point magnetic-lock chin strap that keeps it on during a slip or fall, and built-in Twiceme NFC technology that stores medical and emergency-contact data for first responders. With a lightweight vented ABS shell and a dual-density EPS impact liner, it's a strong modern upgrade for construction, utility, and at-height work where a full brim adds all-around sun and debris protection.

The Lift Safety RADIX Full Brim Vented Safety Helmet meets or exceeds ANSI Z89.1 Type 2, Class C, and the European EN12492 standard. Type 2 certifies protection against both top and lateral impacts; Class C indicates a vented (non-electrical) design for breathability. Its EN12492 compliance covers clauses 4.2.1.2 (front energy absorption), 4.2.1.3 (side), 4.2.1.4 (rear), 4.2.2 (penetration), and 4.2.3 (retention system strength). It is also OSHA compliant and fits head sizes 52–64 cm (6½–8, one size fits most).

Twiceme is an integrated NFC chip built into the Lift Safety RADIX helmet. It stores the wearer's emergency contacts, critical medical information, and certifications, and the data is accessible offline — a first responder or safety manager simply taps an NFC-capable smartphone to the helmet to read it. It's designed to help people both before an incident (situational awareness and gear-status tracking) and after one (fast, life-saving information when seconds count).

No. The vented Lift Safety RADIX is Class C, meaning the ventilation openings make it electrically conductive — it offers no electrical protection and should not be used around electrical hazards. For electrical work, choose the non-vented RADIX, which is rated Class E and provides dielectric protection tested to 20,000 volts. The vented model is intended for general construction, at-height, and hot-weather work where breathability matters and there is no electrical risk.

Both are ANSI Z89.1 Type 2 helmets that also meet EN12492 and include Twiceme NFC technology. The vented version (this model) has 12 ventilation channels and is Class C — cooler in hot conditions but not rated for electrical hazards. The non-vented version has no vents and is Class E, providing dielectric protection tested to 20,000 volts for electrical work. Choose vented for heat and comfort; non-vented for electrical exposure.

Yes. The Lift Safety RADIX is one-size-fits-most, fitting head circumferences from 52 to 64 cm (hat sizes 6½ to 8). It uses the LUX Retention System with an oversized ratchet dial you can turn with or without gloves for a secure, custom fit, plus a moisture-wicking brow pad for comfort. A 4-point chin strap with a magnetic quick-release lock stays fastened when you need it and opens easily even with gloves on.

Yes. The vented full brim design has 12 ventilation channels to keep air flowing and your head cool, and the helmet is lightweight at about 508 g (1.11 lb). A moisture-wicking brow pad and a washable, replaceable antimicrobial microfiber liner manage sweat, while the LUX Retention System distributes weight evenly for all-day wear. It's rated for use from -30 °C to +50 °C (-22 °F to +122 °F).

The Lift Safety RADIX combines several standout features: Twiceme NFC technology (storing medical and emergency data for first responders), 12 ventilation channels for airflow, the LUX Retention System with a glove-friendly oversized ratchet dial, a magnetic-lock 4-point chin strap, and integrated accessory clips for quickly attaching LIFT headlamps, hearing protection, and face shields. Built on a lightweight ABS shell with a dual-density EPS impact liner, it's ANSI Z89.1 Type 2 and EN12492 certified — a modular, all-around alternative to a conventional full-brim hard hat.

The Lift Safety RADIX Full Brim Vented helmet is built for working-at-heights, line work, confined-space entry, heavy industrial, rescue, arborist, and general construction applications. As a Type 2 helmet it protects against both top and lateral impacts, and the full brim adds all-around sun and rain protection. Note that this vented model is Class C (no electrical protection); for electrical exposure, the non-vented Class E version is the correct choice.

Yes. Industrial Safety Products offers the Lift Safety RADIX with optional UV-DTF full-color logo imprinting, priced per location (about $10.90 per location, with front-and-back and four-side options available). Custom imprinting requires a minimum order of 20 helmets and a set-up fee may apply; orders under the minimum ship as non-logo items. The helmet is available in multiple colors — including White, Grey, Blue, Hi-Viz Yellow, and Carbon Fiber — and ships with free shipping.

The Lift Safety RADIX has a lightweight ABS (Acrylonitrile Butadiene Styrene) outer shell and a high-density / dual-density expanded polystyrene (EPS) internal impact liner, with a nylon poly-blend anti-bacterial headband. It is rated for use from -30 °C to +50 °C (-22 °F to +122 °F) and has a recommended service life of 3 to 5 years, depending on job-site conditions and daily inspection. It carries a 1-year limited warranty.