Allegro 9518-24 Heavy-Duty Pneumatic Jet Fan (24″)

When operated, compressed air is pushed through a nozzle at the tip of each fan blade, which propels the fan at high speeds creating up to 16,000 CFM (27,184 m3/hr) for the 24” (60.9 cm) model at 100 psig (6.9 Bar) inlet pressure quickly and efficiently. The unit’s flange is designed to fit standard API tank openings. These units can be used as blowers or exhausters, by simply reverse mounting. These blowers are easily transported from one place to another by using its recessed carry handles, or it may be rolled. 

Meets or Exceeds OSHA standard safety screens

Features:

• Heavy duty aluminum fan and fan housing
• Spark-resistant
• Heavy duty ball bearings (permanently lubricated and sealed for the life of the product)
• Stainless steel fan shaft eliminates internal rust
• 3/4” (1.9 cm) NPT side mount inlet connector for 20” (50.8 cm) model, 1” (2.54 cm) NPT for 24” (60.9 cm) model
• OSHA standard safety screens 
• (11 3/4" x 32 3/4" diameter)

Inlet Pressure (PSIG) / Air Consumption (SCFM) / Decibels @ 5ft.:

• 40 (2.8 Bar) / 76 (129 m3/hr) / N/A 
• 60 (4.1 Bar) / 147 (250 m3/hr) / 109 
• 80 (5.6 Bar) / 225 (382 m3/hr) / 111
• 100 (6.9 Bar) / 338 (574 m3/hr) / 112