Yes. The 3M GG501SGAF GoggleGear 500 is a sealed safety goggle rated D3 (droplet and splash) and D4 (dust), so it protects against liquid splash and fine dust while its impact-rated polycarbonate lens (marked Z87+) guards against flying particles. That combination makes it well suited to grinding, chipping, sawing, cleaning, remediation, and facility maintenance. Its indirect ventilation lets air move while blocking direct splash entry, and the 3M Scotchgard anti-fog coating keeps vision clear during these tasks.

The 3M GG501SGAF GoggleGear 500 goggle is certified to ANSI/ISEA Z87.1, with the lens marked 3M Z87+ to indicate high-impact protection. It is also rated D3 (droplet and splash) and D4 (dust). The lens is polycarbonate and blocks 99.9% of UV. Size is universal (one size), with an adjustable cloth strap.

On the 3M GG501SGAF, the D3 rating means the goggle is tested for protection against droplets and liquid splash, and the D4 rating means it is tested for protection against fine dust. These are splash and dust markings under the ANSI/ISEA Z87.1 eye-protection standard, so a D3/D4 goggle shields the eyes from both wet splash hazards and airborne dust — protection a standard open safety glass does not provide.

The GG501SGAF uses the 3M Scotchgard Protector Anti-Fog / Anti-Scratch Coating, a durable coating bonded to the polycarbonate lens. It resists fogging in humid, hot, or temperature-changing conditions so workers keep clear vision, and it also resists scratches for a longer lens life. Because the coating is bonded to the lens (not a wipe-on spray), it lasts far longer than temporary anti-fog treatments.

Yes. The 3M GG501SGAF is D3-rated for droplet and liquid splash protection, which is why 3M recommends it for chemicals, food and beverage manufacturing, food processing, pharmaceutical, and facility-sanitation environments. Its indirect ventilation reduces direct splash entry while limiting fogging, and the sealed goggle form provides a fuller seal around the eyes than open safety glasses. Note it is protective eyewear rated to ANSI/ISEA Z87.1, not a certified respirator or face shield.

The 3M GG501SGAF is a sealed goggle, not open safety glasses, so it wraps and seals around the eyes for D3 splash and D4 dust protection that glasses cannot match. It adds a low-profile shroud, an adjustable cloth strap for a secure fit, indirect venting to cut fogging, and the bonded 3M Scotchgard anti-fog/anti-scratch coating. For jobs with liquid splash, dust, or fine particulate, the goggle offers meaningfully more coverage than a Z87+ spectacle while still keeping the low-profile feel.

Yes. The 3M GG501SGAF is universal size (one size fits most) with a low-profile design and an adjustable elastic cloth strap so it can be dialed in for a secure, comfortable fit. Indirect ventilation lets air circulate to reduce heat and fogging during extended wear, and the lightweight polycarbonate lens keeps the goggle low-profile on the face.

Yes. The 3M GG501SGAF lens blocks 99.9% of UV and is made of polycarbonate, a lightweight, high-impact material. The clear lens is marked Z87+ for high-impact protection and carries the bonded 3M Scotchgard anti-fog / anti-scratch coating.

The 3M GG501SGAF Clear Scotchgard GoggleGear 500 goggle is available at Industrial Safety Products (industrialsafetyproducts.com) with free ground shipping. It ships as a single goggle (each), in the clear-lens, red-and-black frame configuration, universal size.

The 3M GG501SGAF is a vented goggle with indirect ventilation. Indirect vents allow airflow to reduce heat buildup and fogging while their baffled design still blocks direct liquid splash from entering — which is why the goggle keeps its D3 splash and D4 dust ratings. Fully non-vented goggles are used for gas/vapor or heavy chemical exposure; this indirectly vented model is aimed at splash, dust, and impact tasks where breathability and anti-fog performance matter.