Buy in Bulkand Save Big
Shipping to all Statesto Meet our Customer Needs
Description
- System: EZ-Line™ horizontal lifeline, retractable and portable.
- Capacity: Supports up to 310 lbs (141 kg).
- Length: 60 ft (18.3 m) retractable cable, adjustable to any length.
3M DBI SALA 7605060 Retractable Horizontal Cable Lifeline System (60 ft)
DBI SALA
3M DBI SALA 7605060 Retractable Horizontal Cable Lifeline System (60 ft)
$1,967.00
- DBI-7605060
You May Also Like
$1,967.00
MSRP:
$1,519.59
$1,425.00
$1,520.00
Was:
$1,320.00
Now:
$1,285.99
$1,835.00
3M DBI SALA 7605060 Retractable Horizontal Cable Lifeline System 60'
EZ-Line™ is the most user friendly and fastest horizontal lifeline system to install, remove and store on the market today! EZ-Line’s innovative retractable design allows the user to quickly and efficiently set-up any length of system in only seconds and dismantle it just as quick. The entire lifeline is retracted into an easy to carry case which eliminates large and bulky coils of cable that are difficult to set-up, relocate and store. Additionally, EZ-Line is 33% lighter than traditional systems providing ease-of-use and added worker satisfaction. You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That’s why safety engineers and site directors choose DBI-SALA® horizontal lifelines. We offer the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points.
Standards OSHA 1926.502, Capital Safety Gen. Mfg. Req.
Features and Specs:
- Capacity 310 lbs. (141 kg)
- Max Number Of Users 2 Per Span, 6 Total
- 60 ft. (18.3 m) retractable system can be set at any length
- Rugged 1/4" (6.3mm) 7x19 galvanized cable lifeline
- Ergonomic easy to carry case
- Extremely lightweight and portable design
- Built-in winch, pre-tension and impact indicators
- Durable construction will stand up to tough jobsites
- Single and multi-span (with SecuraSpan™ stanchion) system configurations
- Internal energy absorber limits fall arrest forces
- Flexible system capacity
- Use with any 5,000 lb. (22.2 kN) anchorage device
- Equipped with i-Safe
For industrial/occupational use only. Not for consumer sale or use
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
Frequently Asked Questions
What is the 3M DBI-SALA EZ-Line 7605060 horizontal lifeline system and what standards does it meet?
The 3M DBI-SALA EZ-Line 7605060 is a temporary, portable retractable horizontal cable lifeline system that provides fall protection for workers moving along the horizontal plane where continuous anchorage points aren't available. It meets OSHA 1910.140 and OSHA 1926.502. The entire lifeline retracts into a self-contained carrying case, eliminating the bulky cable coils of traditional systems, and can be set to any length up to 60 ft (18.3 m).
Is the 3M DBI-SALA EZ-Line 7605060 a good choice compared to a traditional horizontal cable lifeline?
Yes. Unlike a traditional lifeline built from loose coils of cable that are slow to set up, relocate, and store, the EZ-Line 7605060 retracts into an easy-to-carry case and can be deployed or dismantled in seconds. It's also about 33% lighter than traditional systems. It's a precision-engineered, OSHA-tested system (OSHA 1910.140 and 1926.502) rather than a simple line strung between two anchors, making it a strong choice for crews that move a temporary lifeline between job sites frequently.
How does the retractable design and built-in winch on the 3M DBI-SALA EZ-Line 7605060 work?
The EZ-Line 7605060 has a built-in winch that lets you pay out and retract the galvanized cable directly from its self-contained casing, so you can set the lifeline to any length up to 60 ft without handling loose coils. A built-in pre-tension indicator confirms proper cable tension with an audible click, and a built-in impact indicator shows whether the system has arrested a fall. A tethered crank handle helps prevent loss during setup.
How many workers can use the 3M DBI-SALA EZ-Line 7605060, and what is its weight capacity?
The EZ-Line 7605060 supports up to 2 workers per span and 6 workers total, with a weight capacity of 310 lb (141 kg) per user. An internal energy absorber helps limit fall arrest forces on the worker and the structure.
What type of cable does the 3M DBI-SALA EZ-Line 7605060 use, and how long can it be set?
The EZ-Line 7605060 uses a rugged 1/4" (6.3 mm) 7x19 galvanized steel cable. The retractable system can be set at any length up to 60 ft (18.3 m), so a single unit adapts to spans of varying lengths on the job.
Can the 3M DBI-SALA EZ-Line 7605060 be used for multi-span installations?
Yes. The EZ-Line 7605060 is compatible with both single-span and multi-span configurations. For multi-span setups it is used with SecuraSpan™ stanchions, letting the horizontal lifeline extend across intermediate supports for larger work areas.
What anchorage does the 3M DBI-SALA EZ-Line 7605060 require?
The EZ-Line 7605060 is designed to connect to any anchorage device rated for 5,000 lb (22.2 kN). As a temporary/portable system, it is set up between suitable anchor points and can be relocated as work areas change.
What are the tension and impact indicators, and the i-Safe feature, on the 3M DBI-SALA EZ-Line 7605060?
The EZ-Line 7605060 has a built-in pre-tension indicator that confirms the cable is correctly tensioned (with an audible click) and a built-in impact indicator that flags whether the system has experienced a fall-arrest event, so it can be inspected and removed from service. It is also equipped with i-Safe, an RFID identification tag that supports quick electronic inspection tracking and record-keeping.
What industries and applications is the 3M DBI-SALA EZ-Line 7605060 best suited for?
The EZ-Line 7605060 is a temporary horizontal lifeline suited to construction, general industry, mining, oil & gas, transportation, and utilities. It's ideal for protecting workers operating in the horizontal plane who don't have continuous access to alternate anchorage points — for example leading-edge work, rooftops, rail cars, and other jobs where a portable, quick-to-deploy lifeline is needed.
Is the 3M DBI-SALA EZ-Line 7605060 easy to transport and store?
Yes. The full lifeline retracts into an ergonomic, self-contained carrying case with a handle, so there are no large, bulky cable coils to manage. It weighs about 30 lb and is roughly 33% lighter than traditional systems, making it easy to carry between job sites, set up in seconds, and store when not in use. It ships with free shipping from Industrial Safety Products.
How does the internal energy absorber on the 3M DBI-SALA EZ-Line 7605060 protect workers in a fall?
The EZ-Line 7605060 has an internal energy absorber that engages during a fall to help limit the fall-arrest forces transmitted to the worker and the anchor structure. Combined with the built-in impact indicator, it lets you confirm after any event whether the system needs to be inspected and taken out of service.
