Yes. The 3M DBI-SALA 7400215 SecuraSpan Rebar/Shear Stud HLL Stanchion with Base is a temporary/portable anchor built specifically to mount to concrete rebar or shear studs, so you can build your own horizontal lifeline (HLL) directly on a rebar deck without permanent anchors. It fits rebar or shear studs from 1/2 in. to 1 in. diameter (#4 to #8 rebar) spaced 4 in. to 12 in. center to center, and it can be configured as single- or multi-span. It's precision-engineered and meets OSHA regulations, holds up to 2 workers per span (6 total), and each worker can weigh up to 310 lbs (141 kg).

Key specs: weight capacity of 310 lbs (141 kg) per worker, up to 2 workers per span and 6 total. It's made of zinc-plated steel for harsh environments, weighs 38 lb (17.3 kg), and is a temporary/portable install. It fits rebar or shear studs 1/2 in. to 1 in. in diameter (#4 to #8 rebar), 4 in. to 12 in. center to center (10.1–30.5 cm), supports single- or multi-span configurations with spans up to 60 ft (18.3 m), and comes equipped with an i-Safe RFID identification tag. It meets OSHA regulations.

It works as a modular anchor point for a temporary cable horizontal lifeline. The stanchion clamps onto concrete rebar or shear studs using a top-mounted bolt and clamp adjustment system, and you add intermediate and end-anchor brackets to run cable between anchors. This lets you build a custom fall-protection line — single-span for up to 2 workers, or multi-span for up to 6 — and it provides pass-thru 100% tie-off protection so a worker stays connected while moving past intermediate anchors. The lifeline cable is ordered separately.

Yes. 3M DBI-SALA HLL systems, including the 7400215 SecuraSpan Rebar/Shear Stud Stanchion with Base, are precision-engineered and meet OSHA regulations for fall protection. It is intended for industrial/occupational use only (not consumer use) and is designed to be used with additional personal protective equipment (PPE) such as a full-body harness and connecting device. Always follow the manufacturer's user instructions when configuring the system.

The 7400215 package includes the stanchion, a rebar/shear stud base, and intermediate and end-anchor brackets so you can configure your own SecuraSpan horizontal lifeline. The lifeline cable is ordered separately, and various lengths and individual components are also available. It's sold at Industrial Safety Products (industrialsafetyproducts.com) with free shipping.

Up to 2 workers per span and 6 workers total. A single-span setup supports 2 workers at a time, while a multi-span configuration accommodates up to 6. The system has a per-worker weight capacity of 310 lbs (141 kg), including the worker plus tools and equipment.

It fits rebar or shear studs from 1/2 in. to 1 in. in diameter (#4 to #8 rebar), spaced 4 in. to 12 in. center to center (10.1–30.5 cm). The top-mounted bolt and clamp adjustment system lets you secure and fine-tune the fit quickly during installation.

It's a temporary, portable, and reconfigurable system rather than a fixed installation. The lightweight (38 lb / 17.3 kg) zinc-plated steel stanchion clamps onto rebar or shear studs and can be moved as the job changes. With intermediate and end-anchor brackets you can run single- or multi-span lines up to 60 ft (18.3 m), and with optional bypass brackets the system can be configured to run indefinitely — giving you jobsite flexibility a permanent lifeline can't match, while still meeting OSHA regulations.

It's used wherever crews work at height on or near concrete rebar/shear-stud decks and need temporary horizontal fall protection. 3M recommends it for construction, transportation, facilities, power plants, general manufacturing, and heavy infrastructure. Because it's portable and reconfigurable, it suits jobs where anchor points move as the pour or build progresses.