Yes. The 3M DBI-SALA Hook2Loop Bungee Tether 1500048 is a tool tether (drop-prevention lanyard) built to secure hand tools up to 15 lb (6.8 kg) so they can't fall to a lower level while you work at height. It has a self-locking carabiner on one end that clips to an anchor point or D-ring, and a cinch (choke) loop on the other end that girth-hitches to the tool. The elastic bungee body stretches from 32 in (81.3 cm) relaxed to 47 in (119.4 cm) so tools stay close and out of the way but extend when needed. It meets ANSI/ISEA 121, the industry Dropped Objects Standard, and is used across construction, general industrial, mining, oil & gas, and transportation. It ships as a 10-pack with free shipping.

The 3M DBI-SALA Hook2Loop Bungee Tether 1500048 meets or exceeds ANSI/ISEA 121, the industry Dropped Objects Standard for tool tethering. This standard governs the design and testing of tool lanyards and other drop-prevention equipment that keep tools from falling to a lower level. The tether is also third-party tested and is part of the 3M DBI-SALA Fall Protection for Tools system.

The 3M DBI-SALA Hook2Loop Bungee Tether works by connecting a tool to an anchor point so it can't drop if it slips from your hand. One end is a self-locking carabiner that clips onto an anchor, D-ring, or tool-tethering attachment point; the other end is a "loop" — a cinch/choke loop of 5/8" tubular webbing that wraps and girth-hitches around the tool. The stretchy bungee section keeps slack managed: it stays short at 32 in (81.3 cm) when relaxed and extends to 47 in (119.4 cm) when you reach, reducing snag hazards while allowing a full range of motion. It handles tools up to 15 lb (6.8 kg).

The 3M DBI-SALA Hook2Loop Bungee Tether 1500048 has a maximum tool weight capacity of 15 lb (6.8 kg). It is designed for most small-to-medium hand tools within that limit — such as spud wrenches, scaffold wrenches, and adjustable wrenches. Always confirm your tool weighs 15 lb or less before tethering it with this lanyard.

The 3M DBI-SALA Hook2Loop Bungee Tether measures 32 in (81.3 cm) relaxed and stretches to 47 in (119.4 cm) when fully extended. The bungee design keeps the tether short and tidy at rest to avoid snags, then extends to give you reach when you need it. It is built from durable 5/8" tubular webbing.

The 3M DBI-SALA Hook2Loop Bungee Tether is a versatile extension that works with virtually any hand tool under 15 lb (6.8 kg) — including spud wrenches, scaffold wrenches, adjustable wrenches, and most other small hand tools. The cinch/choke loop girth-hitches around the tool, and the self-locking carabiner clips to your anchor point. As long as the tool weighs 15 lb or less and has a point to loop around, it's a good fit.

Yes. The 3M DBI-SALA Hook2Loop Bungee Tether 1500048 features a self-locking carabiner that automatically closes and locks to prevent accidental openings (roll-out). This is a key safety feature for dropped-object prevention: it keeps the tool connected to its anchor point even during movement, so the tether can't come unclipped by accident.

The 3M DBI-SALA Hook2Loop Bungee Tether is for tool drop prevention only — it is part of 3M DBI-SALA's Fall Protection for Tools system, not personal fall protection. Its 15 lb (6.8 kg) rating applies to the tool being tethered, not to a person, and it must never be used to arrest or support a worker's fall. It exists to keep dropped tools from injuring people or equipment below and to prevent tool loss. For personal fall arrest, use a rated personal fall protection lanyard or self-retracting lifeline instead.

For many at-height jobs, yes. Unlike a fixed-length tool lanyard, the 3M DBI-SALA Hook2Loop's bungee body contracts to 32 in (81.3 cm) at rest and extends to 47 in (119.4 cm) under reach — so there's less loose line to snag on scaffolding or catch on obstacles, while still giving you room to work. It secures tools up to 15 lb (6.8 kg), uses a self-locking carabiner to prevent accidental release, and meets ANSI/ISEA 121, the Dropped Objects Standard. The self-retracting elastic design is the main advantage over a static lanyard when you want tools kept close and out of the way.

The 3M DBI-SALA 1500048 is sold as a 10-pack of Hook2Loop Bungee Tool Tethers, colored high-visibility yellow. Each tether has a self-locking carabiner, a cinch/choke loop, and a bungee body that stretches from 32 in (81.3 cm) to 47 in (119.4 cm), rated for tools up to 15 lb (6.8 kg). Buying the 10-pack equips a crew for tool tethering at height.

The 3M DBI-SALA Hook2Loop Bungee Tether 1500048, 10/Pack is available at Industrial Safety Products (industrialsafetyproducts.com) with free shipping. It's a genuine 3M DBI-SALA Fall Protection for Tools product — a 10-pack of yellow bungee tool tethers rated for tools up to 15 lb (6.8 kg) and meeting ANSI/ISEA 121.

Yes. The 3M DBI-SALA Hook2Loop Bungee Tether is compatible with the broader 3M DBI-SALA Fall Protection for Tools system — such as tool cinch/attachment points, holsters, wristbands, and anchor connectors — so you can build a complete tool-tethering setup. The self-locking carabiner clips to compatible anchor points, and the cinch loop attaches to tools directly or via a dedicated tool-attachment point for tools without a native tether hole.