The 3M 8212 disposable respirator N95 is well suited for maintenance welding operations, torch cutting, brazing, soldering, and metal pouring. Provides relief from nuisance level odors. Designed for use where metal fumes may be present.

Features and Specs:

• NIOSH approved for at least 95% percent filtration efficiency against certain non-oil based particles
• Recommended for welding and operations in which metal fumes may be present
• Cake resistant filter layers reduce the caking of particles on the surface
• Adjustable noseclip helps provide a custom secure seal
• 3M Cool Flow Exhalation Valve helps reduce heat build-up inside the respirator
• Advanced Electret Media is designed for ease of breathing

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.