Yes. The 3M Full Facepiece Reusable Respirator 6000 Series is designed for jobs like spray painting, chemical cleanup and handling, chemical splash, grinding, sanding, and welding. As a full facepiece, it protects both your respiratory system and your eyes and face at the same time, and its large polycarbonate lens meets ANSI Z87.1 for high-impact eye and face protection. When fitted with the correct 3M cartridges or filters it helps reduce exposure to a broad range of gases, vapors, and particulates — providing protection up to 50× the OSHA permissible exposure limit (PEL) when quantitatively fit tested. Note that cartridges and filters are sold separately.

The 3M Full Facepiece Reusable Respirator 6000 Series is NIOSH approved (tested by NIOSH when used with 3M cartridges, filters, or supplied-air systems), and its lens meets the ANSI Z87.1 standard for high-impact eye and face protection. As a full facepiece air-purifying respirator, it has an assigned protection factor (APF) of up to 50× the OSHA PEL when quantitatively fit tested. It is NIOSH approved only when used with approved 3M bayonet-style filters, cartridges, or supplied-air systems.

Up to 50. When properly fitted and quantitatively fit tested, the 3M Full Facepiece Reusable Respirator 6000 Series provides respiratory protection for concentrations up to 50 times the OSHA permissible exposure limit (PEL). The listing notes a fit-test factor of 10 with qualitative fit testing and 50 with quantitative fit testing, so a quantitative fit test is required to rely on the full APF of 50.

The 3M Cool Flow Exhalation Valve is a one-way valve built into the front of the 6000 Series full facepiece. It releases warm, moist exhaled breath out of the respirator quickly, which reduces heat and moisture build-up inside the mask and makes exhaling easier for cooler, drier comfort during long wear. A unique center adapter directs the exhaled breath and moisture downward and helps keep dirt and debris from collecting in the valve.

It uses a bayonet-style connection and is compatible with 3M 2000, 5000, and 7000 Series filters and 3M 6000 Series cartridges, so you can match the exact gas, vapor, or particulate hazard you're working around. The same facepiece can also be run in supplied-air mode with certain 3M powered and supplied-air systems, including the TR-600 and TR-800 PAPRs and Dual Airline supplied-air systems. Cartridges and filters are not included and are purchased separately.

No. The 3M Full Facepiece Reusable Respirator 6000 Series is sold as the facepiece only — cartridges and filters are not included. You select and buy the correct 3M bayonet-style filters (2000/5000/7000 Series) or 6000 Series cartridges separately, based on the specific gases, vapors, or particulates in your workplace. Spare and replacement parts are also available to keep the respirator in service.

The 3M Full Facepiece Reusable Respirator 6000 Series comes in three sizes — small, medium, and large (the large facepiece is model 6900). It uses a soft silicone faceseal and a 4-point (four-strap) suspension to distribute pressure and create a comfortable, balanced seal on the head. For respiratory protection to be valid, the wearer must pass a fit test in the chosen size — a quantitative fit test is needed to rely on the full protection factor of 50.

Yes. Besides working as a negative-pressure air-purifying respirator with 3M filters and cartridges, the 6000 Series full facepiece can be used in supplied-air mode with certain 3M powered and supplied-air systems — including the 3M TR-600 and TR-800 PAPRs and Dual Airline supplied-air systems. This lets one facepiece cover both filtering and supplied-air applications, adding flexibility for different jobs and hazard levels.

A full facepiece protects more than a half mask: it seals over the eyes and face as well as the nose and mouth, so it guards against irritating or corrosive gases, vapors, and splashes that a half mask leaves the eyes exposed to. Its large polycarbonate lens meets ANSI Z87.1 for high-impact eye/face protection and gives a wide field of view, and the full facepiece carries a higher assigned protection factor (up to 50× the PEL vs 10 for a half mask). Choose the full facepiece when you need combined eye/face and respiratory protection or higher-concentration protection.

The 3M Full Facepiece Reusable Respirator 6000 Series is available at Industrial Safety Products (industrialsafetyproducts.com) with free shipping, in small, medium, and large sizes. It's a reusable, gray silicone/TPE facepiece with a large polycarbonate lens and the 3M Cool Flow Exhalation Valve; remember to also order the correct 3M bayonet-style filters or cartridges for your specific hazard, since they are not included.