3M 393-3004-2 PELTOR Earmuff Probed Test Cushion #35 (Pair)

3M™ PELTOR™ Earmuffs X4/ X5 Probed Test Cushions easily snap into the 3M™ PELTOR™ X-Series X4 and X5 Earmuffs (sold separately) to allow for fit testing with the 3M™ E-A-Rfit™  Dual-Ear Validation System. The complete system issues a pass or fail rating based on the employee's personal attenuation rating (PAR) when wearing 3M PELTOR X-Series X4 and X5 Earmuffs

Features:

• Easily snaps into employee's own earmuffs enableing fit test. Adapter clips hold mircrophone next to earmuff for proper positioning during testing
• Probed cushions can be cleaned with hygiene wipes and reused
• Adapter clips hold microphones next to earmuffs during testing
• *The NRR may overestimate the hearing protection provided during typical use.
• Sold by Pair

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.