MSA IO4 Automated Gas Meter Test System

The io 4 Dock enables effortless calibration and bump testing which helps to improve compliance and safety. When in the io Dock, the Altair io 4 portable gas detector knows when it needs a bump test and immediately runs the appropriate test. When the ALTAIR io 4 is in the Dock, all compliance reporting is sent immediately to your MSA Grid account, helping to minimize the risks associated with manual record keeping or data file management.

Features and Specs:

• Simultaneous testing of multiple detectors and sensor configurations
• Test bank can include up to three cylinder holders and 10 test stands with no messy calibration gas tubing
• Gas Cylinders can be RFID-enabled or manually configured
• Cylinder Holder LEDs provide Light band indication of low, empty, or expired calibration gas
• No networking required for compliance reporting to the cloud-based MSA Grid account
• The display indicates current Bank status including current cylinder expiration and pressure in PSI or Bar, while Test Stand LEDs and display indicates current test and test stand status
• The io4 Dock Leverages the ALTAIR io 4 connectivity for fast, correct test system setup with no complex user-interface
• Test Modes include:
• Bump test only
• Calibration only
• Bump test with calibration on failure of bump
• Smart Mode - Dock will perform a bump test or calibration as required by the Grid-configured gas detector settings without user intervention

Kit Includes: 

MSA 10242927 ALTAIR io4 5-Device Smart Charger:

• The ALTAIR io Charge can charge up to five io 4 wearable detectors and has the same size profile as the io Dock test stand. Detectors are inserted face up, with charging pins to rear. 
• Green light indicates not charging which means fully charged or no instrument inserted. Red light indicates the unit or units are charging. Each multi-unit charger requires an individual power source.
• Unit can be used as a stand-alone device or mechanically attached to a MSA io 4 Calibration Station.

MSA 10242914 ALTAIR io4 Dock Test Stand

• Automated Testing simplifies calibration and bump testing processes, with smart recognition of required tests for the ALTAIR io 4.
• Wireless integration features Bluetooth 4.0 and IEEE 802.11 b/g WLAN for future enhancements, alongside Ethernet connectivity while cloud reporting needs no additional connectivity required for reporting Bank status.
• Seamless compliance presents direct cloud-based reporting to MSA Grid account, eliminating manual record-keeping and data file management risks.

MSA 10048280 Calibration Gas Cylinder (CH4/LEL, O2, CO and H2S)

• All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS.
• Calibration gas cylinder 1.45% CH4, 15% O2, 60 ppm CO, 20 ppm H2S
• Sizes 34L