Note: This Harness is discontinued and will be replaced by Guardian Series 3 Full-Body Harness with Side-D-Rings. https://www.industrialsafetyproducts.com/guardian-series-3-full-body-harness-with-side-d-rings/
Guardian Seraph Construction Harness with 3 D-rings
Streamlined and efficient, the Seraph Harness expands upon the features offered by the Guardian Fall Protection Velocity Harness, and is perfectly suited for a variety of fall protection applications. The Seraph Harness is designed with a back pad, shoulder pads, and improved elasticity in the shoulders for added comfort. It is also quick and easy to adjust, and offers break-away lanyard keepers.
Meets ans Exceeds: ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
Features and Specs:
- 5 points of adjustment
- Adjustable dorsal D-ring
- Quick-adjust torso buckles
- Superior flexibility and comfort
- PT Chest / TB Legs / TB Waist
- Galvanized Steel
- Polyester and nylon
- 130-420 lbs.
Restraint: Seraph Harness may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard.Always account for fully deployed length of lanyard/SRL. Structure must with stand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal). Applicable D-rings:
Dorsal, Chest, Side, Shoulder.
Seraph Harness, configured with side or shoulder D-rings, may be used in Work Positioning applications. Work Positioning systems allow a worker to be supported while in suspension and work freely with both hands. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side, Shoulder.For all applications: worker weight capacity range (including all clothing, tools, and equipment) is 130-420 lbs.
Seraph Harness may be used in Rescue/Confined Space applications. Rescue systems function to safely recover a worker from a confined location or after exposed to a fall. There are various configurations of Rescue systems depending on the type of rescue. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable D-rings:
Dorsal, chest, shoulder.