DBI-SALA® 2:1 Safe Bucket 1500182 (1 EA)

3M™ DBI-SALA®2:1 Safe Buckets have been redesigned to be ANSI/ISEA 121-2018 compliant. The internal closure system is designed to contain 100% of the contents when inverted and meets the ANSI-ISEA 121 inverted test requirements.

3M™ DBI-SALA®2:1 Safe Buckets have been redesigned to be ANSI/ISEA 121-2018 compliant. The internal closure system is designed to contain 100% of the contents when inverted and meets the ANSI-ISEA 121 inverted test requirements. 15% Heavier canvas with reinforced construction exceeds ANSI-ISEA 121 dynamic test requirements making 3M buckets tougher and stronger than prior models. Additional webbing added to increase overall strength. New, Reinforced stitching pattern on handles increase 2:1 Safe Bucket safety factor in static pull testing over prior models. Hard composite 2:1 Bucket bottoms resist punctures. Just one part of your drop prevention system, Whether you're working on a bridge or on a wind turbine, 3M has a system of drop prevention solutions to address a variety of job demands. These solutions are designed to pair with your tools to help keep you, your crew, and your gear protected.

Meets or Exceeds ANSI/ISEA 121-2018 Standard

Features:

• Internal closure system designed to contain 100 percent of contents when inverted. Meets ANSI-ISEA 121 inverted test requirements.
• Features a drawstring closure system that acts as an extra layer of spill-protection during transport and lifting.
• The Safe Bucket was engineered for use with tools at height, and includes six connection points for tethering.
• Heavy-duty canvas that is load rated for 100 lbs.
• Integrated hoisting strap. Instead of rope, which is susceptible to fraying a heavy-duty hoisting/shoulder strap is built into the Safe Bucket.
• Integrated carabiner. Bucket is equipped with a high-quality and lightweight aluminum twist-lock carabiner loaded rated for 30 kN (6,700 lbs.)
• Puncture resistance. Safe Bucket features hard composite plating at the bottom to protect it from accidental punctures. A leather sleeve also covers the inserts protecting them from the elements and harsh work environments.

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.