3M DBI SALA 2104531 First-Man-Up Anchor System with Adjustable Pole

One of the most common challenges in creating a safe at-height working environment is the establishment of a safe anchorage point for attachment of a personal fall arrest system. Often the only approved anchorage points exist overhead, out of reach of workers. The First-Man-Up™ Pole System assists in the installation and removal of DBI-SALA tie-off adaptor anchorage connectors and vertical lifelines where overhead installation is required, and where no access to the anchorage point is available. The system utilizes a telescoping pole and adaptor tool to place and securely anchor a tie-off adaptor to an overhead anchorage point. It also incorporates a snap hook connector tool to securely attach a vertical lifeline (or other device) to the tie-off adaptor. Setup, installation and removal is quick and easy; the system can be stored in the included carrying bag.

Meets or Exceeds OSHA 1910.140, OSHA 1926.502

Features and Specs:

• Capacity 310 lbs. (141 kg) ANSI / 420 lbs. (190 kg) OSHA
• Free climb steel structures while maintaining 100% fall protection
• Installs anchor and lifeline to top of steel structure from the ground
• Allows user to easily work around obstructions
• Pole adjusts from 8 to 16 ft. (1.8-3.6m)
• 3 ft. (0.9m) pass-thru type tie-off adaptor
• Tie-off adaptor installation/removal tool
• Snap hook attachment/removal tools for original and 3,600 lb. gated hooks
• Carrying bag for easy transport and storage

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.