• Best Prices
  • Best Products
  • Best Brands
  • Best Customer Service

3M 2078 P95 Respirator Filters For 5000, 6000, 7000 Series (2/Package)

3M

3M 2078 P95 Respirator Filters For 5000, 6000, 7000 Series (2/Package)

$13.99
2078
Bulk Pricing:
  • Buy 6 or above and get 3% off

3M 2078 P95 Respirator Filters For 5000, 6000, 7000 Series (2 Filters)

Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, or 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. When properly fitted, use for a variety of applications including dust, welding, metal pouring and certain finishing operations for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Also offers nuisance level relief from organic vapors and acid gases that are below the PEL. *Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in for respiratory protection against organic vapors or acid gases or environments that are immediately dangerous to life or health (IDLH). Not NIOSH certified for use against ozone

Details

  • P95 particulate filter
  • Nuisance Organic Vapor relief
  • Use with 3M™ Reusable Respirators

Meets or exceeds: Standards/Approvals P95 - NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of organic vapor/acid gases and for ozone protection up to 10X OSHA PEL.

Features and Specs: 

  • Accessories: Yes
  • Aerosol Type: Oil and Non-Oil
  • Case Quantity: 100
  • Connection Type: Bayonet
  • Gas & Vapor Protection Type: Particulates
  • Height: 4.3 Inch
  • Height (Metric): 10.92
  • Length: 4.3 Inch
  • Nuisance Odor Relief (< OSHA PEL): Organic Vapors and Acid Gases
  • Product Series: 6000, 7000, 7500, 7800S, FF-400, Rugged Comfort 6500

Recommended Application: Assembly and Mechanical, Cleaning, Finishing Operations, Metal Pouring, Painting, Powder Charging, Welding
Recommended Industry : General Manufacturing, Mining, Oil & Gas, Transportation

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.